Frosty's HVAC
4.9 stars · 99 Google reviews

Heating Replacement in Farmers Branch, TX

Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.

Licensed TACLA126718E
EPA 608 Universal Certified
Family-Owned Since 2018
99 Reviews · 4.9 Stars

Where in Farmers Branch Do We Install Furnaces and Heat Pumps?

Our shop is at 11410 Mathis Ave — physically inside Farmers Branch 75234. We cover 75234, 75244, and 75381 including Brookhaven, Valley View, Valwood, Mercer Crossing, and Town Center, with most addresses reachable in under 12 minutes from the Mathis Ave headquarters. Farmers Branch sits in Dallas County.

Now serving Farmers Branch

Our shop is at 11410 Mathis Ave — physically inside Farmers Branch 75234. Brookhaven and Valley View calls reach a tech in under 12 minutes. We stock R-410A and R-454B refrigerant, every common 2-5 ton capacitor and contactor, and Goodman/Carrier/Trane condenser fan motors so most calls finish on the first visit.

Farmers Branch climate and heating context

Farmers Branch sits inside the DFW urban heat island — peak attic temps in 1960s-80s ranch homes routinely hit 150-160°F July through early September, which is why dual-run capacitor failures dominate our summer call volume in Brookhaven and Valley View.

How Much Does Heating Replacement Cost in Farmers Branch?

Heating replacement in Farmers Branch runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.

Stay Cool

Goodman · 15 SEER2 · Single-stage

$8,000-$14,000

1-year labor warranty

  • Frosty Thermostat (smart WiFi thermostat)
  • New disconnect box
  • Electrical whip
  • Overflow condensate shutoff
Most Popular

Stay Frosty

Carrier · 18 SEER2 · Dual-stage

$12,000-$18,000

2-year labor warranty

  • Everything in Stay Cool
  • Ductwork inspection + sealing (up to 5 connections)

It's A Frosty Life

Trane · 20+ SEER2 · Variable speed

$16,000-$20,000+

5-year labor warranty

  • Everything in Stay Frosty
  • Full ductwork inspection + sealing
  • Vibration isolation mounts
  • 1-year Frosty Club included ($99 value)

Add-on: 10-Year Labor Warranty +$3,500

Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)

Financing Available

$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.

See Financing Options

What's Included With Every Farmers Branch Heating Replacement?

Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.

Frosty Thermostat (smart WiFi thermostat — our brand, included free)
New electrical whip and disconnect (if needed)
Condensate drain line treatment (90%+ AFUE units)
Combustion analysis after install (gas furnaces)
Copper line inspection (replaced if compromised, for heat pumps)
Load calculation (Manual J)
City permit pulled under TACLA126718E
Full cleanup + haul-away of old equipment
R-454B or R-32 refrigerant (heat pump installs — never R-410A for new)
EPA 608 Universal certified install crew
Post-install walkthrough + WiFi thermostat setup
Manufacturer warranty registration

Why Do Farmers Branch Homeowners Choose Frosty's for Heating Replacement?

Farmers Branch is where I've installed more heating replacements than anywhere else in DFW — and the pattern never changes. The Valley View, Brookhaven, and Valwood neighborhoods are wall-to-wall 1960s–1982 ranch homes with 80% AFUE gas furnaces that have been patched and coaxed through 30+ North Texas winters. When the inducer motor, control board, and gas valve all start failing in the same season, replacement stops being a sales pitch and becomes the only honest recommendation. I run the 10-year cost-of-ownership numbers for repair versus replacement during every estimate — if the repair wins, I'll say so. But on a 35-year-old furnace burning 30–40% of its fuel straight up the flue, the math usually points one direction.

Every heating replacement I install in Farmers Branch is pulled under Mariafernanda's TACLA126718E contractor license, permitted through the City of Farmers Branch building department (Dallas County jurisdiction), and inspected to current mechanical code. That permit process matters more than most homeowners realize — an unpermitted install is the single most common reason manufacturer warranty claims get denied on review. The permit fee is built into my quote; you'll never see it as a surprise line item on install day. All 2025-forward replacements leave on R-454B or R-32 refrigerant for heat pump options per the EPA AIM Act phase-down — no more R-410A on new installs.

Three tiers, all flat-rate: Stay Cool (Goodman 15 SEER2 heat pump or 80% AFUE gas furnace, $8,000–$14,000), Stay Frosty (Carrier 18 SEER2 dual-stage, $12,000–$18,000 — the tier I recommend most for Farmers Branch ranch homes because the dual-stage compressor handles Texas's mild winters at low capacity and dehumidifies better in summer), and It's A Frosty Life (Trane 20+ SEER2 variable-speed, $16,000–$20,000+). Every tier includes the Frosty Thermostat, new disconnect, condensate drain treatment, permit, and full haul-away. Add $3,500 for a 10-year labor warranty. $0-down financing through Optimus, Synchrony, GreenSky on approved credit. 99 Google reviews at 4.9 stars since January 1, 2018.

Neighborhoods we serve in Farmers Branch: Valley View, Brookhaven, Midway Hollow, Mercer Crossing, Valwood

Why Should I Trust Frosty's Credentials for Heating Installation?

Because a new furnace install requires a city permit pulled under a licensed contractor — TACLA126718E. Combine that with EPA 608 #2396328 for heat-pump refrigerant work and 99 Google reviews at 4.9 stars, and every credential below is independently verifiable before install day.

TACLA126718E

Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.

EPA 608 Universal

Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.

DOE Efficiency Partner

All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.

Learn more about our credentials on our About page or visit omar-jacobo.com.

What Do Farmers Branch Homeowners Ask About Heating Replacement?

How much does furnace replacement cost in Farmers Branch, TX?

Full heating replacement in Farmers Branch: Stay Cool (Goodman, 15 SEER2 heat pump or 80% AFUE gas) $8,000–$14,000. Stay Frosty (Carrier, dual-stage) $12,000–$18,000 — most popular for Valley View and Brookhaven ranch homes. It's A Frosty Life (Trane, variable-speed) $16,000–$20,000+. Heat pump adds $2,000 over gas in the same tier. 10-year labor warranty add $3,500. Permit, Frosty Thermostat, and haul-away included.

Should I replace my 1970s Farmers Branch furnace with gas or a heat pump?

For a typical Valley View or Brookhaven ranch home, both work well. Gas furnaces heat faster in extreme cold and cost less upfront. Heat pumps handle Texas winters easily (we rarely sustain below 25°F), provide both heating and cooling from one outdoor unit, and run on electricity rather than Atmos Energy natural gas — which can be an advantage depending on your rate structure. Heat pump adds about $2,000 over gas in the same tier. I run the 10-year cost comparison during the free estimate so you choose based on real numbers.

How long does a furnace replacement take in Farmers Branch?

Most single-furnace replacements finish in one day — 6 to 9 hours from truck arrival to final startup, combustion analysis, and Frosty Thermostat commissioning. Jobs that convert from gas furnace to heat pump or require significant ductwork remediation in an attic with tight clearance can stretch to 1.5–2 days. We lock in the timeline during the free in-home estimate and don't leave until the system is running and the WiFi app is set up on your phone.

Will a new furnace actually lower my winter gas bill in Farmers Branch?

Measurably. A 30-year-old 60–70% AFUE furnace wastes 30–40 cents of every gas dollar up the flue. A new 96% AFUE condensing furnace wastes less than 4 cents. For a Farmers Branch home spending $120–$180 on Atmos Energy gas during December–February, that's $30–$70/month in real savings — roughly $200–$500 per winter season. Heat pumps can save even more depending on your Oncor electric rate, since they move heat rather than burning fuel.

Can I finance a new heating system for my Farmers Branch home?

Yes. We work with Optimus, Synchrony, and GreenSky — $0 down on approved credit, terms up to 120 months. A $14,500 Stay Frosty heating replacement at 9.99% for 120 months runs about $192/month. 50% deposit required at booking, balance due at installation. Prequalification takes about 5 minutes during the free estimate — soft credit check, no commitment.

How Do I Get Started with Heating Replacement in Farmers Branch?

Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.

Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.

OJ

Written by

By

Texas Licensed HVAC Contractor #TACLA126718E · EPA #2396328

Co-Owner of Frosty's HVAC LLC, serving DFW since 2018. Learn more

// Ready When You Are

Ready For Reliable HVAC Service?

Request service online, call for same-day help, or see your replacement price.

Call NowBookText Us