Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.
Real stories from recent Frosty's HVAC jobs in Irving, TX -- published straight from the field.
When our tech arrived on Brandon Ct in Irving, this family's system just wouldn't cool—and the culprit was a failed capacitor on the condenser. We swapped it out that same evening and had things running right by night's end, so the house could finally cool back down. Nothing beat...
Our team services Irving from our Farmers Branch base — 10 miles via SH-183 West (or SH-114), roughly 15 minutes. We cover 75038, 75039, 75060, 75061, and 75062 including Las Colinas, Valley Ranch, Heritage District, Hackberry Creek, MacArthur Park, and North Irving. Irving sits in Dallas County.
Irving is 15 minutes from our Farmers Branch shop via SH-183 or SH-114. Same-day response is standard across Las Colinas, Valley Ranch, Heritage District, Hackberry Creek, MacArthur Park, and North Irving. We stock R-22 reclaimed refrigerant for older Heritage District equipment, ECM blower modules for Las Colinas variable-speed builds, and standard capacitors and contactors for the broad mid-life housing stock everywhere in between.
Irving's housing stock spans seven decades — Heritage District 1950s-1970s ranches with original duct and R-22 equipment, Valley Ranch 1990s-2000s two-story family homes hitting the 20-25 year replacement window, Las Colinas 1980s townhomes through 2020s luxury new construction. That diversity means failure modes vary block to block: Heritage District is blower bearings burned out from 140-160°F attic heat; Valley Ranch is evaporator-coil leaks at the second-floor return; Las Colinas is ECM control-board failures on communicating systems.
Heating replacement in Irving runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.
Goodman · 15 SEER2 · Single-stage
1-year labor warranty
Carrier · 18 SEER2 · Dual-stage
2-year labor warranty
Trane · 20+ SEER2 · Variable speed
5-year labor warranty
Add-on: 10-Year Labor Warranty +$3,500
Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)
$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.
See Financing OptionsEvery tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.
I'm Omar Jacobo, owner of Frosty's HVAC. Irving heating replacement runs the full spectrum — from straightforward 80% AFUE single-stage swaps in Heritage District bungalows to high-end variable-speed 96% AFUE condensing furnace upgrades in Las Colinas custom homes. Heritage District's 1950s-1970s housing stock is often on its second or third furnace, and the original ductwork and gas piping may need inspection before a new unit goes in. Valley Ranch 1990s-2000s homes are hitting the 20-25 year wall on their first or second furnace, and upgrading from 80% AFUE to 96% AFUE condensing is the most common request I get. That upgrade isn't plug-and-play — condensing furnaces require PVC intake and exhaust runs routed through the attic or closet wall to a code-compliant exterior termination per NFPA 54. All Irving gas service comes through Atmos Energy. Three tiers, all flat-rate: Stay Cool $8,000-$14,000, Stay Frosty $12,000-$18,000, It's A Frosty Life $16,000-$20,000+.
The gas-versus-heat-pump decision splits along Irving's housing lines. Heritage District and Valley Ranch homes almost universally have Atmos Energy natural gas service, so a 96% AFUE two-stage or variable-speed furnace is typically the most cost-effective heating across DFW's 20-30 annual freeze nights. Las Colinas, however, has a significant pocket of all-electric townhomes and condos with no gas line — for those, a variable-speed heat pump from Trane or Carrier handles our mild winters efficiently, with electric heat strips as backup below 15 degrees. Heat pumps add $2,000 over the base tier but qualify for the federal 25C tax credit up to $2,000, effectively offsetting the upgrade. We run a gas-vs-heat-pump 10-year operating cost comparison on every Irving replacement so you see the real math, not a sales pitch.
Every Irving heating replacement includes: proper flue venting (PVC intake/exhaust on 96% AFUE condensing units meeting NFPA 54, code-compliant B-vent on 80% units), new disconnect and electrical whip if needed, City of Irving permit, Frosty Thermostat (our smart WiFi thermostat), condensate management on the secondary heat exchanger, vibration isolation on variable-speed equipment, and full cleanup/haul-away. Labor warranty matches tier: 1-year on Stay Cool, 2-year on Stay Frosty, 5-year on It's A Frosty Life. Optional 10-year labor warranty for $3,500. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit. I'm EPA 608 Universal certified (#2396328), Mariafernanda holds TACLA126718E. Call (469) 254-0548.
Neighborhoods we serve in Irving: Las Colinas, Valley Ranch, Heritage District, Hackberry Creek, MacArthur Park, North Irving
Because a new furnace install requires a city permit pulled under a licensed contractor — TACLA126718E. Combine that with EPA 608 #2396328 for heat-pump refrigerant work and 143 Google reviews at 4.9 stars, and every credential below is independently verifiable before install day.
Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.
Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.
All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.
Learn more about our credentials on our About page or visit omar-jacobo.com.
Frosty's covers every residential HVAC need in Irving, TX — one phone line, one flat-rate pricing book, one licensed (TACLA126718E) family-owned team.
Same flat-rate heating replacementpricing across every city we cover. If you're in a Irving-adjacent neighborhood, these pages have local details for your ZIP.
Deeper context on heating replacement written by Omar Jacobo (EPA 608 #2396328).
If you have Atmos Energy natural gas (most Heritage District and Valley Ranch homes), a 96% AFUE two-stage or variable-speed furnace is typically cheapest to operate across DFW's 20-30 annual freeze nights. If you're in an all-electric Las Colinas townhome or condo with no gas line, a variable-speed heat pump works well and qualifies for the federal 25C tax credit up to $2,000. We run both numbers on every Irving quote.
Full system replacement runs $8,000-$20,000+ depending on tier. Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$20,000+. Heat pump adds $2,000 (offset by 25C federal tax credit up to $2,000); 10-year labor warranty adds $3,500. Flat-rate quote before any work begins.
Depends on square footage, insulation, window orientation, and ductwork condition — not a rule of thumb. We run a Manual J load calculation on every replacement. Heritage District 1,200-1,600 sqft ranches typically need 60,000-80,000 BTU. Valley Ranch 2,500-3,500 sqft two-stories need 80,000-100,000 BTU. Oversizing causes short cycling and comfort issues.
Yes, but it's not a direct swap. A 96% AFUE condensing furnace requires PVC intake and exhaust venting routed to the exterior per NFPA 54 code, plus a condensate drain from the secondary heat exchanger. We plan the flue path with you during the quote so there are no surprises on install day. The efficiency gain (80% to 96%) means 16% less natural gas consumed — that's $200-$400/year in Atmos Energy savings on most Irving homes.
Yes — we pull a City of Irving permit on every gas furnace or heat pump replacement. Proper venting on condensing furnaces requires PVC intake and exhaust to specific code clearances per NFPA 54, and the City inspector verifies all of it. The inspector typically comes within 2-3 weeks. Permit fees are included in the flat-rate quote.
Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.
Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.
Written by
By Omar Jacobo
Texas Licensed HVAC Contractor #TACLA126718E · EPA #2396328
Co-Owner of Frosty's HVAC LLC, serving DFW since 2018. Learn more
Request service online, call for same-day help, or see your replacement price.
Call Now