Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.
Real stories from recent Frosty's HVAC jobs in Coppell, TX -- published straight from the field.
When a family on South MacArthur Blvd in Coppell called because their system wouldn't cool, our technician traced the problem to an electrical wiring issue related to a recent breaker replacement. After correcting the wiring, the system began operating properly, but further testi...
Our team services Coppell from our Farmers Branch base — 7 miles via I-635 West to MacArthur Boulevard, roughly 12 minutes. We cover 75019 and 75099 including Riverchase, Cypress Waters, Northlake Woodlands, Old Coppell, and MacArthur Corridor. Coppell sits in Dallas County.
Coppell is 10-12 minutes from our Farmers Branch shop via I-635 west to MacArthur. Same-day response is routine across 75019 from Riverchase to Old Coppell. We stock float switches and condensate drain treatment for the lake-humidity coil-clog problem, plus dual-zone capacitors and contactors for the 1990s-2000s two-story housing in Northlake Woodlands and Copperstone where upstairs units fail first.
Coppell sits next to Grapevine Lake, and every April through June cottonwood drift packs onto outdoor condenser fins like felt — choking airflow, overheating compressors, and pre-aging capacitors. Lake humidity also accelerates condensate-line algae growth in attic-mounted air handlers, which is why two-story Riverchase and Northlake Woodlands homes see drain-pan overflow events earlier in the season than dry inland cities.
Heating replacement in Coppell runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.
Goodman · 15 SEER2 · Single-stage
1-year labor warranty
Carrier · 18 SEER2 · Dual-stage
2-year labor warranty
Trane · 20+ SEER2 · Variable speed
5-year labor warranty
Add-on: 10-Year Labor Warranty +$3,500
Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)
$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.
See Financing OptionsEvery tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.
I'm Omar Jacobo, owner of Frosty's HVAC. Coppell heating replacement is ramping up because the city's 1990s-2000s builder-grade furnaces in Riverchase, Northlake Woodlands, Alexander Court, and Copperstone are hitting the 25+ year mark. Most of these are 80% AFUE single-stage gas furnaces on Atmos Energy natural gas — reliable for two decades but now past the point where repair makes financial sense. Upgrading to a 96% AFUE condensing furnace isn't a simple swap: condensing units require PVC intake and exhaust venting with a proper condensate drain to a code-compliant termination, which means new penetrations in the attic or exterior wall. We plan the flue path with you before committing to a tier so there are no surprises on install day. Three tiers, all flat-rate: Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$20,000+.
The big decision for Coppell homeowners is gas furnace versus heat pump. If you have Atmos Energy gas service — which covers most of Riverchase, Northlake Woodlands, and Old Coppell — a 96% AFUE two-stage gas furnace is typically cheapest to operate across the 20-30 annual freeze nights North Texas sees. If you're in Cypress Waters newer construction or a pocket of Coppell that was built all-electric, a variable-speed heat pump from Trane or Carrier works well in our climate with electric heat strips as backup below 15°F. Heat pumps add $2,000 over the base tier but qualify for the federal 25C tax credit up to $2,000, effectively offsetting the upgrade cost. All new installs use R-454B or R-32 refrigerant per the EPA AIM Act. I run gas-vs-heat-pump 10-year cost comparisons on every Coppell quote so you see the actual numbers — not a sales pitch.
Every Coppell heating replacement includes: proper flue venting (PVC intake/exhaust on 96% AFUE condensing units, code-compliant B-vent on 80% units) or heat pump line set, Frosty Thermostat (our smart WiFi thermostat), new disconnect and electrical whip, condensate management on the secondary heat exchanger, City of Coppell permit, and full cleanup/haul-away. All work meets NFPA 54 standards for gas piping and venting. Labor warranty scales with tier: 1-year Stay Cool, 2-year Stay Frosty, 5-year It's A Frosty Life. Optional 10-year labor warranty adds $3,500. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit. Call (469) 254-0548.
Neighborhoods we serve in Coppell: Riverchase, Cypress Waters, Northlake Woodlands, Old Coppell, MacArthur Corridor
Because a new furnace install requires a city permit pulled under a licensed contractor — TACLA126718E. Combine that with EPA 608 #2396328 for heat-pump refrigerant work and 143 Google reviews at 4.9 stars, and every credential below is independently verifiable before install day.
Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.
Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.
All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.
Learn more about our credentials on our About page or visit omar-jacobo.com.
Frosty's covers every residential HVAC need in Coppell, TX — one phone line, one flat-rate pricing book, one licensed (TACLA126718E) family-owned team.
Same flat-rate heating replacementpricing across every city we cover. If you're in a Coppell-adjacent neighborhood, these pages have local details for your ZIP.
Deeper context on heating replacement written by Omar Jacobo (EPA 608 #2396328).
Full system replacement runs $8,000-$20,000+ depending on tier. Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$20,000+. Heat pump adds $2,000 (offset by the 25C federal tax credit up to $2,000); 10-year labor warranty adds $3,500. All pricing is flat-rate — quoted before we start.
Depends on your existing gas service. Most Coppell homes in Riverchase, Northlake Woodlands, and Old Coppell have Atmos Energy natural gas, making a 96% AFUE two-stage furnace the cheapest to operate across 20-30 freeze nights per year. Cypress Waters newer all-electric homes are great heat pump candidates — and the federal 25C tax credit up to $2,000 offsets the $2,000 heat pump upgrade cost. I run both numbers on every quote.
An 80% AFUE furnace sends 20% of the gas energy up the flue as waste heat. A 96% AFUE condensing furnace captures almost all of it, using a secondary heat exchanger to extract additional heat from exhaust gases before they vent. The trade-off: condensing furnaces need PVC intake/exhaust runs and a condensate drain — not a direct swap on most Coppell attic installations. The efficiency gain pays back in lower Atmos Energy bills over 3-5 years on a typical Coppell home.
Standard single-system replacement is one full day (8-10 hours). If upgrading from 80% to 96% AFUE, the PVC venting install adds time — sometimes pushing into a second day on complex attic configurations. We pull the City of Coppell permit before starting and the inspector typically comes out within 2-3 weeks. Dual-zone Coppell homes replacing both furnaces take 2-3 days total.
Yes — we pull a City of Coppell permit on every gas furnace or heat pump replacement. The city inspector verifies gas piping, flue venting clearances, electrical connections, and condensate drainage on condensing units. Permit fees are included in the flat-rate quote. All work meets NFPA 54 standards and Atmos Energy connection requirements.
Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.
Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.
Written by
By Omar Jacobo
Texas Licensed HVAC Contractor #TACLA126718E · EPA #2396328
Co-Owner of Frosty's HVAC LLC, serving DFW since 2018. Learn more
Request service online, call for same-day help, or see your replacement price.
Call Now