Frosty's HVAC
4.9 stars · 99 Google reviews

Heating Replacement in Addison, TX

Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.

Licensed TACLA126718E
EPA 608 Universal Certified
Family-Owned Since 2018
99 Reviews · 4.9 Stars

Where in Addison Do We Install Furnaces and Heat Pumps?

Our team services Addison from our Farmers Branch base — 5 miles via Dallas North Tollway North, roughly 10 minutes. We cover 75001 including Addison Circle, Vitruvian Park, Beltway Addison, Midway Road corridor, and Belt Line Road. Addison sits in Dallas County.

Now serving Addison

Addison is one of our shortest drives — about 10 minutes from our Farmers Branch shop up the Dallas North Tollway. During business hours we often arrive within an hour. We carry isolation mounts and flexible duct connectors for the common-wall installs in Addison Circle and Vitruvian Park, degreaser-rated coil cleaner for the restaurant-district condenser fouling, plus float switches sized for stacked condensate routing where one clog can flood multiple units below.

Addison climate and heating context

Addison packs more residents per square mile than most DFW suburbs into 4.4 sq mi — Addison Circle and Vitruvian Park alone house thousands in stacked condominium and townhome units where almost every install is a common-wall, common-attic, common-condensate-stack project. Shared-wall vibration carries between units, so isolation mounts and flexible duct connectors aren't optional; bare-metal supply trunks transmit blower hum straight into a neighbor's bedroom. Outdoor condenser banks at the Addison Circle and Belt Line restaurant district sit downwind of dozens of commercial kitchen exhaust hoods, and the resulting grease film on coil fins traps every leaf and lint particle that lands — coils foul faster here than in residential-only suburbs. Townhome ductwork runs are short by necessity, which makes static-pressure design finicky in a way that sprawled single-family homes never face.

How Much Does Heating Replacement Cost in Addison?

Heating replacement in Addison runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.

Stay Cool

Goodman · 15 SEER2 · Single-stage

$8,000-$14,000

1-year labor warranty

  • Frosty Thermostat (smart WiFi thermostat)
  • New disconnect box
  • Electrical whip
  • Overflow condensate shutoff
Most Popular

Stay Frosty

Carrier · 18 SEER2 · Dual-stage

$12,000-$18,000

2-year labor warranty

  • Everything in Stay Cool
  • Ductwork inspection + sealing (up to 5 connections)

It's A Frosty Life

Trane · 20+ SEER2 · Variable speed

$16,000-$20,000+

5-year labor warranty

  • Everything in Stay Frosty
  • Full ductwork inspection + sealing
  • Vibration isolation mounts
  • 1-year Frosty Club included ($99 value)

Add-on: 10-Year Labor Warranty +$3,500

Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)

Financing Available

$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.

See Financing Options

What's Included With Every Addison Heating Replacement?

Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.

Frosty Thermostat (smart WiFi thermostat — our brand, included free)
New electrical whip and disconnect (if needed)
Condensate drain line treatment (90%+ AFUE units)
Combustion analysis after install (gas furnaces)
Copper line inspection (replaced if compromised, for heat pumps)
Load calculation (Manual J)
City permit pulled under TACLA126718E
Full cleanup + haul-away of old equipment
R-454B or R-32 refrigerant (heat pump installs — never R-410A for new)
EPA 608 Universal certified install crew
Post-install walkthrough + WiFi thermostat setup
Manufacturer warranty registration

Why Do Addison Homeowners Choose Frosty's for Heating Replacement?

Addison heating replacements split along the same age lines as the AC jobs. In the 1970s-80s ranch pockets along Belt Line and off Midway, we mostly replace 18-25 year old gas furnaces with single-stage or two-stage 96% AFUE units. For those older homes, I usually recommend a matched system (furnace + AC in the same tier) because mixing a new high-efficiency AC with an old furnace means the variable-speed blower can't actually modulate properly and you lose most of the efficiency gain you paid for.

Addison Circle, Vitruvian Park, and Beltway Addison townhome and condo owners more often ask me about heat pumps. And in Addison's climate — 20-30 freeze nights, but 200+ cooling days a year — a modern variable-speed heat pump (Trane, Carrier) genuinely makes sense. You get heating and cooling from one system, efficiency down to about 15°F ambient (below that, electric heat strips kick in), and you lose the annual gas furnace safety inspection worry because there's no combustion happening. In a townhome with a closet-mounted air handler, that matters — no flue to vent through a neighbor's wall. Heat pumps add about $2,000 over the base tier but often qualify for federal tax credits (check with your tax person) and some Oncor rebates.

Every heating replacement in Addison includes: new disconnect and electrical whip (if needed), proper flue venting or heat pump line set, permit, Frosty Thermostat (our smart WiFi thermostat), condensate management on the new coil, and full cleanup/haul-away. Labor warranty matches the tier: 1-year Stay Cool, 2-year Stay Frosty, 5-year It's A Frosty Life. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit.

Neighborhoods we serve in Addison: Addison Circle, Vitruvian Park, Beltway Addison, Midway Road corridor, Belt Line Road

Why Should I Trust Frosty's Credentials for Heating Installation?

Because a new furnace install requires a city permit pulled under a licensed contractor — TACLA126718E. Combine that with EPA 608 #2396328 for heat-pump refrigerant work and 99 Google reviews at 4.9 stars, and every credential below is independently verifiable before install day.

TACLA126718E

Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.

EPA 608 Universal

Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.

DOE Efficiency Partner

All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.

Learn more about our credentials on our About page or visit omar-jacobo.com.

What Do Addison Homeowners Ask About Heating Replacement?

Should I get a furnace or heat pump in Addison?

Depends on your existing setup and housing type. If you have natural gas already in an older Belt Line ranch, a 96% AFUE two-stage furnace is typically cheapest to operate through Addison's 20-30 freeze nights. If you're in an Addison Circle townhome, a modern variable-speed heat pump avoids flue-venting issues in shared walls, qualifies for federal tax credits, and works well in this climate. We run both numbers so you can compare.

How much does heating replacement cost in Addison, TX?

Full system replacement runs $8,000-$20,000+ depending on tier and whether it's gas furnace, heat pump, or electric. Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$20,000+. Heat pump adds $2,000 over the base tier; 10-year labor warranty adds $3,500.

What size furnace do I need for my Addison home?

It depends on square footage, insulation, window area, and ductwork — not just a rule of thumb. We run a Manual J load calculation on every replacement, which is the ACCA standard for sizing. Addison ranch homes in the 1,800-2,500 sqft range typically need 60,000-80,000 BTU furnaces. Townhomes are usually smaller and need 40,000-60,000 BTU. Oversizing causes short cycling, temperature swings, and humidity issues.

How long does a new furnace or heat pump last in Addison?

Gas furnaces: 15-20 years with annual maintenance. Heat pumps: 12-15 years because they run year-round for both heating and cooling. Variable-speed equipment tends to last longer than single-stage because it doesn't cycle on/off as hard. Frosty Club Premium ($300/yr) includes 2 tune-ups which extend equipment life significantly.

Do you offer financing for heating replacement in Addison?

Yes — Optimus, Synchrony, and GreenSky with $0 down on approved credit. 50% deposit at booking, balance on completion. Application takes 5 minutes and most Addison homeowners get approved same-day. Monthly payments work out to roughly 1/60th of the system price.

How Do I Get Started with Heating Replacement in Addison?

Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.

Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.

OJ

Written by

By

Texas Licensed HVAC Contractor #TACLA126718E · EPA #2396328

Co-Owner of Frosty's HVAC LLC, serving DFW since 2018. Learn more

// Ready When You Are

Ready For Reliable HVAC Service?

Request service online, call for same-day help, or see your replacement price.

Call NowBookText Us