Frosty's HVAC
4.9 stars · 99 Google reviews

AC Replacement in The Colony, TX

Three flat-rate residential replacement tiers, $8,000-$20,000+. R-454B / R-32 only. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.

Licensed TACLA126718E
EPA 608 Universal Certified
Family-Owned Since 2018
99 Reviews · 4.9 Stars

Where in The Colony Do We Install R-32 Systems?

Our team services The Colony from our Farmers Branch base — 18 miles via Dallas North Tollway North to SH-121, roughly 25 minutes. We cover 75056 including Austin Ranch, Grandscape, Rivers Edge, Indian Creek, and Stewart Peninsula. The Colony sits in Denton County.

Now serving The Colony

The Colony is about 25 minutes from our Farmers Branch shop via the Dallas North Tollway. Same-day calls are routine. We carry vibration isolation mounts for the Austin Ranch shared-wall townhome installs, condensate biocide treatment for the Stewart Peninsula and Rivers Edge lake-humidity coil corrosion, plus communicating-system diagnostic tools for Grandscape variable-speed Carrier Infinity and Trane XV20 systems. Se Habla Español.

The Colony climate and installation context

Lewisville Lake sits right on The Colony's north and east borders, driving humidity 5-10% higher than inland DFW. Stewart Peninsula and Rivers Edge homes show evaporator coil corrosion 3-5 years faster than identical inland equipment. Austin Ranch is dense townhome and apartment district with shared-wall construction (vibration transfer between units) and tight mechanical closets — zoning damper failures and TXV issues on upstairs zones dominate. Grandscape (2020s) is almost all variable-speed high-efficiency equipment with inverter drive faults as the new failure mode.

How Much Does AC Replacement Cost in The Colony?

AC replacement in The Colony runs $8,000-$20,000+ depending on tier, tonnage, and ductwork condition. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down on approved credit.

Stay Cool

Goodman · 15 SEER2 · Single-stage

$8,000-$14,000

1-year labor warranty

  • Frosty Thermostat (smart WiFi thermostat)
  • New disconnect box
  • Electrical whip
  • Overflow condensate shutoff
Most Popular

Stay Frosty

Carrier · 18 SEER2 · Dual-stage

$12,000-$18,000

2-year labor warranty

  • Everything in Stay Cool
  • Ductwork inspection + sealing (up to 5 connections)

It's A Frosty Life

Trane · 20+ SEER2 · Variable speed

$16,000-$20,000+

5-year labor warranty

  • Everything in Stay Frosty
  • Full ductwork inspection + sealing
  • Vibration isolation mounts
  • 1-year Frosty Club included ($99 value)

Add-on: 10-Year Labor Warranty +$3,500

Adjustments: Electric system −$1,000 · Heat pump +$2,000

Financing Available

$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.

See Financing Options

What's Included With Every The Colony AC Replacement?

Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.

Frosty Thermostat (smart WiFi thermostat — our brand, included free)
New outdoor disconnect box
New electrical whip
Overflow condensate safety shutoff
Condensate drain line treatment
Copper line inspection (replaced if compromised)
Load calculation (Manual J)
City permit pulled under TACLA126718E
Full cleanup + haul-away of old equipment
R-454B or R-32 refrigerant (never R-410A for new installs)
EPA 608 Universal certified install crew
Post-install walkthrough + WiFi thermostat setup

Why Do The Colony Homeowners Choose Frosty's for AC Replacement?

The Colony replacement jobs break into three buckets. The first is 1990s-era Indian Creek — single-family homes now 25-30 years old running on original equipment that's well past its service life. Those are straight furnace-and-AC swaps, but the ductwork is almost always original flex duct with failed mastic and 20-30% air leakage. A proper replacement there isn't just the condenser on the pad — it's a Manual J load calculation, duct sealing at minimum, and right-sized equipment. Oversizing is the #1 mistake we see from box-shop contractors in older Colony neighborhoods. According to Energy.gov, a properly sized system can reduce energy consumption by 20-30% compared to an oversized unit that short-cycles.

The second bucket is the lakefront — Stewart Peninsula, Rivers Edge — where Lewisville Lake humidity drives coil corrosion faster than inland DFW. For these homes I strongly recommend the Stay Frosty (Carrier, 18 SEER2 dual-stage) or It's A Frosty Life (Trane, 20+ SEER2 variable speed) tier, because variable-speed compressors run longer cycles at lower capacity, which pulls more moisture out of the air. The IRA (Inflation Reduction Act) provides up to $2,000 in federal tax credits for qualifying heat pump installations — check IRS.gov Form 5695 for current eligibility. The third bucket is Austin Ranch townhomes and Grandscape new builds — Austin Ranch needs zoning-aware replacements with vibration isolation mounts for shared walls, and Grandscape homes almost always want the variable-speed tier to match the 2020s build-out. Compare system pricing across DFW at newacnearme.com.

Every replacement includes a Frosty Thermostat (our smart WiFi thermostat), new disconnect box, electrical whip, overflow condensate shutoff, condensate drain treatment, copper line inspection (replaced if needed), permit, and full cleanup with haul-away. Labor warranty scales with the tier: 1-year on Stay Cool, 2-year on Stay Frosty, 5-year on It's A Frosty Life. All equipment comes with manufacturer warranty. Financing available through Optimus, Synchrony, and GreenSky — $0 down on approved credit. Se Habla Espanol — call (469) 254-0548. I'm Omar Jacobo, TACLA126718E-licensed, EPA 608 Universal (#2396328), 99 Google reviews at 4.9 stars.

Neighborhoods we serve in The Colony: Austin Ranch, Grandscape, Rivers Edge, Indian Creek, Stewart Peninsula

Why Should I Trust Frosty's Credentials for AC Installation?

Because a new system install is a $10,000+ decision — and Texas law requires a licensed contractor to pull the permit. Every credential below (TACLA126718E, EPA 608 #2396328, 99 Google reviews) is independently verifiable before we touch your home.

TACLA126718E

Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.

EPA 608 Universal

Omar Jacobo, #2396328. Required by the U.S. EPA for all new R-454B and R-32 installs under the 2025 refrigerant phase-down.

ENERGY STAR Partner

All three tiers meet or exceed ENERGY STAR SEER2 minimums. Stay Frosty and It's A Frosty Life qualify for utility rebates in many ERCOT territories.

Learn more about our credentials on our About page or visit omar-jacobo.com.

What Do The Colony Homeowners Ask About AC Replacement?

How Much Does A New AC System Cost In The Colony, TX?

Flat-rate pricing by tier: Stay Cool (Goodman 15 SEER2 single-stage) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2 dual-stage) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2 variable speed) $16,000-$20,000+. Exact price depends on tonnage and whether it's electric or heat pump. Heat pump adds $2,000; 10-year labor warranty adds $3,500. Frosty Club members save 15% on parts.

What SEER Rating Do You Recommend For Stewart Peninsula Lakefront Homes?

For lakefront homes in Stewart Peninsula and Rivers Edge, I recommend 18 SEER2 dual-stage (Stay Frosty) at minimum, and ideally 20+ SEER2 variable-speed (It's A Frosty Life). Lewisville Lake humidity drives coil corrosion, and variable-speed systems run longer at lower capacity, which dehumidifies better and extends coil life. Typical CoServ Electric bill savings is $80-$120/month in summer — payback in 5-7 years.

How Long Does AC Installation Take In The Colony?

Standard residential replacement is one full day (8-10 hours). Austin Ranch townhomes with tight mechanical closets and zoning work can take 1.5 days. Older Indian Creek homes requiring ductwork repair can run 2 days. We pull the permit before we start, and the city inspector comes out within 2-3 weeks of completion.

Should I Replace My 1990s Indian Creek AC System?

If your system is 20+ years old and you're putting $1,000+ per year into repairs, replacement is usually the cheaper long-term choice. Indian Creek homes often need duct sealing or partial duct replacement alongside the equipment swap — we do Manual J load calculations and Manual D duct sizing so the new system is actually right-sized, not just bigger. Energy.gov recommends replacement when annual repair costs exceed 50% of system value.

Do You Offer Financing For AC Replacement In The Colony?

Yes — Optimus, Synchrony, and GreenSky with $0 down on approved credit. 50% deposit at booking, balance on completion. Monthly payments work out to roughly 1/60th of the system price. Financing applications take 5 minutes and most The Colony homeowners get approved same-day. Call (469) 254-0548.

Should I Replace My Old R-22 AC System in Austin Ranch and Grandscape?

Yes — EPA 608 Universal cert #2396328 lets me legally recover, recycle, and recharge R-22 under federal regulations. R-22 production ended in 2020 under the Clean Air Act phase-out (EPA.gov), so it now runs $200 per pound installed. A typical Austin Ranch and Grandscape R-22 leak repair totals $650-$1,000: electronic leak detection ($250) or nitrogen leak test ($500) plus recharge at $200/lb. Optional leak seal $350 — but it can void manufacturer warranties, so I only recommend it in specific cases. For systems past 12 years with major leaks, planning the transition to R-454B or R-32 is usually the better economics. Read our R-410A phase-out explainer for DFW homeowners.

Do I Need to Replace My R-410A System in Austin Ranch and Grandscape Because of the AIM Act?

No — not just because of the AIM Act. R-410A production for new equipment ended Jan 1, 2025 under the AIM Act (Energy.gov), but existing systems remain serviceable indefinitely under EPA 608 Universal cert #2396328. I'd only recommend replacing a Austin Ranch and Grandscape R-410A system if it's past 12-15 years old, has compressor failure, or has a major leak that makes ongoing recharges (R-410A at $100/lb installed, plus $250-$500 leak detection) uneconomical. New replacements use R-454B or R-32 only. Read our R-410A phase-out explainer for DFW homeowners.

How Do I Get Started with Frosty's in The Colony?

Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.

Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.

OJ

Written by

By

Texas Licensed HVAC Contractor #TACLA126718E · EPA #2396328

Co-Owner of Frosty's HVAC LLC, serving DFW since 2018. Learn more

// Ready When You Are

Ready For Reliable HVAC Service?

Request service online, call for same-day help, or see your replacement price.

Call NowBookText Us