Frosty's HVAC
4.9 stars · 99 Google reviews

Heating Replacement in The Colony, TX

Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.

Licensed TACLA126718E
EPA 608 Universal Certified
Family-Owned Since 2018
99 Reviews · 4.9 Stars

Where in The Colony Do We Install Furnaces and Heat Pumps?

Our team services The Colony from our Farmers Branch base — 18 miles via Dallas North Tollway North to SH-121, roughly 25 minutes. We cover 75056 including Austin Ranch, Grandscape, Rivers Edge, Indian Creek, and Stewart Peninsula. The Colony sits in Denton County.

Now serving The Colony

The Colony is about 25 minutes from our Farmers Branch shop via the Dallas North Tollway. Same-day calls are routine. We carry vibration isolation mounts for the Austin Ranch shared-wall townhome installs, condensate biocide treatment for the Stewart Peninsula and Rivers Edge lake-humidity coil corrosion, plus communicating-system diagnostic tools for Grandscape variable-speed Carrier Infinity and Trane XV20 systems. Se Habla Español.

The Colony climate and heating context

Lewisville Lake sits right on The Colony's north and east borders, driving humidity 5-10% higher than inland DFW. Stewart Peninsula and Rivers Edge homes show evaporator coil corrosion 3-5 years faster than identical inland equipment. Austin Ranch is dense townhome and apartment district with shared-wall construction (vibration transfer between units) and tight mechanical closets — zoning damper failures and TXV issues on upstairs zones dominate. Grandscape (2020s) is almost all variable-speed high-efficiency equipment with inverter drive faults as the new failure mode.

How Much Does Heating Replacement Cost in The Colony?

Heating replacement in The Colony runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.

Stay Cool

Goodman · 15 SEER2 · Single-stage

$8,000-$14,000

1-year labor warranty

  • Frosty Thermostat (smart WiFi thermostat)
  • New disconnect box
  • Electrical whip
  • Overflow condensate shutoff
Most Popular

Stay Frosty

Carrier · 18 SEER2 · Dual-stage

$12,000-$18,000

2-year labor warranty

  • Everything in Stay Cool
  • Ductwork inspection + sealing (up to 5 connections)

It's A Frosty Life

Trane · 20+ SEER2 · Variable speed

$16,000-$20,000+

5-year labor warranty

  • Everything in Stay Frosty
  • Full ductwork inspection + sealing
  • Vibration isolation mounts
  • 1-year Frosty Club included ($99 value)

Add-on: 10-Year Labor Warranty +$3,500

Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)

Financing Available

$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.

See Financing Options

What's Included With Every The Colony Heating Replacement?

Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.

Frosty Thermostat (smart WiFi thermostat — our brand, included free)
New electrical whip and disconnect (if needed)
Condensate drain line treatment (90%+ AFUE units)
Combustion analysis after install (gas furnaces)
Copper line inspection (replaced if compromised, for heat pumps)
Load calculation (Manual J)
City permit pulled under TACLA126718E
Full cleanup + haul-away of old equipment
R-454B or R-32 refrigerant (heat pump installs — never R-410A for new)
EPA 608 Universal certified install crew
Post-install walkthrough + WiFi thermostat setup
Manufacturer warranty registration

Why Do The Colony Homeowners Choose Frosty's for Heating Replacement?

The Colony furnace and heat pump replacements split along neighborhood lines. In 1990s Indian Creek we mostly replace 20-25 year old gas furnaces with 96% AFUE two-stage units. For those homes I usually recommend a matched system (furnace + AC in the same tier) because mixing a new high-efficiency AC with an old furnace means the variable-speed blower can't actually modulate properly and you lose most of the efficiency gain. Indian Creek ductwork usually needs sealing or partial replacement on the same job — it's 25-30 years old and it shows. Energy.gov data confirms that mismatched HVAC components can reduce overall system efficiency by 15-20%.

Grandscape and Rivers Edge homeowners more often ask me about heat pumps, and in The Colony's climate — 20-30 freeze nights, but 200+ cooling days a year, plus the lake-effect humidity — a modern variable-speed heat pump (Trane, Carrier) genuinely makes sense. You get heating and cooling from one system, efficiency down to about 15°F ambient (below that, the electric heat strips kick in), and you lose the annual gas furnace safety inspection worry because there's no combustion happening. The IRA provides up to $2,000 in federal tax credits for qualifying heat pump installations through 2032 — check IRS.gov Form 5695 for eligibility. Austin Ranch townhomes get heat pump recommendations almost by default — tight mechanical closets and shared walls make gas venting complicated, and heat pumps eliminate the issue. Compare full system pricing at newacnearme.com.

Every heating replacement in The Colony includes: new disconnect and electrical whip (if needed), proper flue venting or heat pump line set, permit, Frosty Thermostat (our smart WiFi thermostat), condensate management on the new coil, and full cleanup/haul-away. Labor warranty matches the tier: 1-year on Stay Cool, 2-year on Stay Frosty, 5-year on It's A Frosty Life. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit. Se Habla Espanol — call (469) 254-0548. I'm Omar Jacobo, TACLA126718E-licensed, EPA 608 Universal (#2396328), 99 Google reviews at 4.9 stars.

Neighborhoods we serve in The Colony: Austin Ranch, Grandscape, Rivers Edge, Indian Creek, Stewart Peninsula

Why Should I Trust Frosty's Credentials for Heating Installation?

Because a new furnace install requires a city permit pulled under a licensed contractor — TACLA126718E. Combine that with EPA 608 #2396328 for heat-pump refrigerant work and 99 Google reviews at 4.9 stars, and every credential below is independently verifiable before install day.

TACLA126718E

Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.

EPA 608 Universal

Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.

DOE Efficiency Partner

All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.

Learn more about our credentials on our About page or visit omar-jacobo.com.

What Do The Colony Homeowners Ask About Heating Replacement?

Should I Get A Furnace Or Heat Pump In The Colony?

Depends on your existing setup. If you have natural gas already and a straightforward venting path, a 96% AFUE two-stage furnace is typically cheapest to operate through 20-30 freeze nights. If you're electric-only, in Austin Ranch townhomes where venting is complicated, or want one system for both heating and cooling, a modern variable-speed heat pump works well in The Colony and qualifies for IRA federal tax credits. We run both numbers so you can compare.

How Much Does Heating Replacement Cost In The Colony, TX?

Full system replacement runs $8,000-$20,000+ depending on tier and whether it's gas furnace, heat pump, or electric. Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$20,000+. Heat pump adds $2,000 over the base tier; 10-year labor warranty adds $3,500. Frosty Club members save 15% on parts.

What Size Furnace Do I Need For My The Colony Home?

It depends on square footage, insulation, window area, and ductwork — not just a rule of thumb. We run a Manual J load calculation on every replacement, which is the ACCA standard for sizing. Indian Creek homes in the 2,000-2,800 sqft range typically need 60,000-80,000 BTU furnaces. Oversizing is a bigger problem than undersizing — it causes short cycling, temperature swings, and humidity issues.

How Long Does A New Furnace Or Heat Pump Last In The Colony?

Gas furnaces: 15-20 years with annual maintenance. Heat pumps: 12-15 years because they run year-round for both heating and cooling. Lakefront homes in Stewart Peninsula and Rivers Edge sometimes run shorter due to humidity-driven corrosion — another reason variable-speed equipment is worth it there. Frosty Club Premium ($300/yr) includes 2 tune-ups which extend equipment life significantly.

Do You Offer Financing For Heating Replacement In The Colony?

Yes — Optimus, Synchrony, and GreenSky with $0 down on approved credit. 50% deposit at booking, balance on completion. Application takes 5 minutes and most The Colony homeowners get approved same-day. Monthly payments work out to roughly 1/60th of the system price. Call (469) 254-0548.

How Do I Get Started with Heating Replacement in The Colony?

Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.

Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.

OJ

Written by

By

Texas Licensed HVAC Contractor #TACLA126718E · EPA #2396328

Co-Owner of Frosty's HVAC LLC, serving DFW since 2018. Learn more

// Ready When You Are

Ready For Reliable HVAC Service?

Request service online, call for same-day help, or see your replacement price.

Call NowBookText Us