Frosty's HVAC
4.9 stars · 94 Google reviews

Heating Replacement in Frisco, TX

Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.

Licensed TACLA126718E
EPA 608 Universal Certified
Family-Owned Since 2018
94 Reviews · 4.9 Stars

How Much Does Heating Replacement Cost in Frisco?

Heating replacement in Frisco runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.

Stay Cool

Goodman · 15 SEER2 · Single-stage

$8,000-$14,000

1-year labor warranty

  • Frosty Thermostat (smart WiFi thermostat)
  • New disconnect box
  • Electrical whip
  • Overflow condensate shutoff
Most Popular

Stay Frosty

Carrier · 18 SEER2 · Dual-stage

$12,000-$18,000

2-year labor warranty

  • Everything in Stay Cool
  • Ductwork inspection + sealing (up to 5 connections)

It's A Frosty Life

Trane · 20+ SEER2 · Variable speed

$16,000-$20,000+

5-year labor warranty

  • Everything in Stay Frosty
  • Full ductwork inspection + sealing
  • Vibration isolation mounts
  • 1-year Frosty Club included ($99 value)

Add-on: 10-Year Labor Warranty +$3,500

Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)

Financing Available

$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.

See Financing Options

What's Included With Every Frisco Heating Replacement?

Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.

Frosty Thermostat (smart WiFi thermostat — our brand, included free)
New electrical whip and disconnect (if needed)
Condensate drain line treatment (90%+ AFUE units)
Combustion analysis after install (gas furnaces)
Copper line inspection (replaced if compromised, for heat pumps)
Load calculation (Manual J)
City permit pulled under TACLA126718E
Full cleanup + haul-away of old equipment
R-454B or R-32 refrigerant (heat pump installs — never R-410A for new)
EPA 608 Universal certified install crew
Post-install walkthrough + WiFi thermostat setup
Manufacturer warranty registration

Why FriscoHomeowners Choose Frosty's for Heating Replacement

Frisco heating replacements look very different from older-DFW jobs because the housing stock is essentially all 1990s-2020s. Most Phillips Creek Ranch, Stonebriar, and Frisco Lakes homes already have 96% AFUE high-efficiency gas furnaces or dual-fuel heat pump systems — we're not coming in to retrofit a 1970s 80% AFUE unit. The replacements we do here are typically 12-18 year old systems where the variable-speed blower failed, the heat exchanger cracked, or the homeowner is tired of running an electric-heat-only system through Frisco's 20-30 freeze nights a year.

Dual-fuel is a popular upgrade conversation in Frisco. Combine a variable-speed heat pump with a 96% AFUE gas furnace backup, and you get heating efficiency down to about 35°F (where the system automatically switches to gas), no annual gas combustion safety worry on mild days because the heat pump handles them, plus you qualify for federal tax credits on the heat pump side (check with your tax person). On a 4,000+ sqft Phillips Creek Ranch home with 2-3 zones, this setup typically saves $400-$700/yr in winter Oncor and Atmos bills compared to a gas-only system.

Every heating replacement in Frisco includes: new disconnect and electrical whip (if needed), proper flue venting or heat pump line set, permit, Frosty Thermostat (our smart WiFi thermostat — not Nuve), condensate management on the new coil, and full cleanup/haul-away. Labor warranty matches the tier: 1-year on Stay Cool, 2-year on Stay Frosty, 5-year on It's A Frosty Life. On two-story homes we always check zoning damper operation and supply duct sizing before we install — no point dropping a $16,000 variable-speed furnace on undersized upstairs ducts. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit.

Neighborhoods we serve in Frisco: The Star, Stonebriar, Frisco Lakes, Phillips Creek Ranch

Why Our Credentials Matter for Heating Installation

TACLA126718E

Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.

EPA 608 Universal

Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.

DOE Efficiency Partner

All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.

Learn more about our credentials on our About page or visit omar-jacobo.com.

Heating Replacement FAQ for Frisco, TX

Should I get a furnace, heat pump, or dual-fuel system in Frisco?

Dual-fuel (heat pump + gas furnace backup) is what I recommend for most Frisco homes. You get heat pump efficiency on mild winter days, automatic gas furnace backup for the 20-30 freeze nights, and you qualify for federal tax credits on the heat pump side. Pure gas furnace is the budget option; pure heat pump works for smaller all-electric Frisco Lakes homes. We run all three numbers.

How much does heating replacement cost in Frisco, TX?

Full system replacement runs $8,000-$20,000+ depending on tier and system type. Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$20,000+. Heat pump adds $2,000 over the base tier; 10-year labor warranty adds $3,500. Most Frisco two-story homes land in the $14,000-$22,000 range.

What size furnace do I need for a 4,000 sqft Frisco home?

It depends on square footage, insulation, window area, ductwork, and zoning — not just a rule of thumb. We run a Manual J load calculation on every replacement, which is the ACCA standard. A 4,000 sqft Phillips Creek Ranch two-story typically needs 100,000-120,000 BTU furnace input, often split across two air handlers if the house is zoned. Oversizing is a bigger problem than undersizing — it causes short cycling and humidity issues.

How long does a new furnace or heat pump last in Frisco?

Gas furnaces: 15-20 years with annual maintenance. Heat pumps: 12-15 years because they run year-round for both heating and cooling. Variable-speed equipment tends to last longer than single-stage because it doesn't cycle on/off as hard. Frosty Club Premium ($300/yr) includes 2 tune-ups which extend equipment life significantly.

Do you offer financing for heating replacement in Frisco?

Yes — Optimus, Synchrony, and GreenSky with $0 down on approved credit. 50% deposit at booking, balance on completion. Application takes 5 minutes and most Frisco homeowners get approved same-day. Monthly payments work out to roughly 1/60th of the system price.

Ready for a New Heating System in Frisco?

Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.

Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.

OJ

Written by

Omar Jacobo

EPA 608 Certified Technician (#2396328) | Co-Owner, Frosty's HVAC LLC

Omar has been serving local homeowners since 2018. Learn more

// Ready When You Are

Ready For Reliable HVAC Service?

Request service online, call for same-day help, or see your replacement price.

Call NowBookText Us