Heating Replacement in University Park, TX
Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.
Where in University Park Do We Install Furnaces and Heat Pumps?
Our team services University Park from our Farmers Branch base — 9 miles via Dallas North Tollway South, roughly 15 minutes. We cover 75205 and 75225 including Caruth Homeplace, SMU area, Snider Plaza, and Hillcrest. University Park sits in Dallas County.
Now serving University Park
University Park is 15 minutes from our Farmers Branch shop via the Dallas North Tollway south. Same-day calls are routine. We document mismatched equipment pairings on the first visit so landlords and resident owners both have a clear picture before the next failure. If a closet is genuinely too tight to service the coil properly, we say so rather than half-fix it — bandaging an inaccessible coil for one season just kicks a bigger water-damage bill down the road.
University Park climate and heating context
University Park's repair pattern is shaped less by housing age (1920s-1950s originals) and more by ownership turnover: a meaningful share of the 75205/75225 housing stock is rented to SMU faculty, graduate students, or rotating renters who cycle every 1-3 years, and many older homes are in some stage of gut-rebuild on any given month. Renovation-era systems get installed under whoever's contractor schedule moved fastest, which leaves a trail of half-finished zone wiring, mismatched indoor-outdoor refrigerant pairings, and air handlers shoehorned into former servant quarters and butler's pantries. Closet handlers in those original spaces typically have 18-22 inches of clearance instead of the 36 inches modern coils need for cleaning — which is why corrosion and water-damage callbacks here so often trace back to the previous contractor cutting service-access corners. Rental-cycle landlord work tends to favor whatever-fits over whatever-fits-properly.
How Much Does Heating Replacement Cost in University Park?
Heating replacement in University Park runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.
Stay Cool
Goodman · 15 SEER2 · Single-stage
1-year labor warranty
- Frosty Thermostat (smart WiFi thermostat)
- New disconnect box
- Electrical whip
- Overflow condensate shutoff
Stay Frosty
Carrier · 18 SEER2 · Dual-stage
2-year labor warranty
- Everything in Stay Cool
- Ductwork inspection + sealing (up to 5 connections)
It's A Frosty Life
Trane · 20+ SEER2 · Variable speed
5-year labor warranty
- Everything in Stay Frosty
- Full ductwork inspection + sealing
- Vibration isolation mounts
- 1-year Frosty Club included ($99 value)
Add-on: 10-Year Labor Warranty +$3,500
Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)
Financing Available
$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.
See Financing OptionsWhat's Included With Every University Park Heating Replacement?
Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.
Why Do University Park Homeowners Choose Frosty's for Heating Replacement?
University Park heating replacements come with the same complications as the AC side — most of the homes are 1920s-1950s originals around Caruth Homeplace and the SMU-adjacent streets that have been gut-renovated 2-3 times, which means the furnace I'm pulling out is the 3rd or 4th the house has ever had. The mechanical closet, attic space, or basement-equivalent crawl was rarely designed for the equipment the previous contractor put in, and I've seen flue venting routed in ways that wouldn't pass current code. A proper UP heating replacement means right-sizing through Manual J, planning the flue or heat pump line set carefully, and respecting the historic finishes around the work area.
Many University Park homeowners ask me about heat pumps, especially during gut renovations or when the gas service to a closet handler is hard to maintain. In Dallas's climate — 20-30 freeze nights, but 200+ cooling days a year — a modern variable-speed heat pump (Trane, Carrier) genuinely makes sense. You get heating and cooling from one system, efficiency down to about 15°F ambient (below that, the electric heat strips kick in), and you lose the annual gas furnace safety inspection worry because there's no combustion happening. Heat pumps add about $2,000 over the base tier but often qualify for federal tax credits (check with your tax person) and some Oncor rebates. For multi-zone setups in larger UP homes, heat pumps pair well with variable-speed handlers.
Every heating replacement in University Park includes: new disconnect and electrical whip (if needed), proper flue venting or heat pump line set, permit, Frosty Thermostat (our smart WiFi thermostat), condensate management on the new coil, and full cleanup/haul-away. We protect original floors, plaster walls, and historic millwork during the install. Labor warranty matches the tier: 1-year on Stay Cool, 2-year on Stay Frosty, 5-year on It's A Frosty Life. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit. Omar Jacobo (EPA 608 Universal #2396328), Mariafernanda holds the TACLA126718E master license; doing this since January 1, 2018, 99 Google reviews at 4.9 stars. Call (469) 254-0548.
Neighborhoods we serve in University Park: Caruth Homeplace, SMU area, Snider Plaza, Hillcrest
Why Should I Trust Frosty's Credentials for Heating Installation?
Because a new furnace install requires a city permit pulled under a licensed contractor — TACLA126718E. Combine that with EPA 608 #2396328 for heat-pump refrigerant work and 99 Google reviews at 4.9 stars, and every credential below is independently verifiable before install day.
TACLA126718E
Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.
EPA 608 Universal
Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.
DOE Efficiency Partner
All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.
Learn more about our credentials on our About page or visit omar-jacobo.com.
Related Services in University Park
Frosty's covers every residential HVAC need in University Park, TX — one phone line, one flat-rate pricing book, one licensed (TACLA126718E) family-owned team.
- AC Repair in University Park/ac-repair-university-park-tx
- AC Replacement in University Park/ac-replacement-university-park-tx
- Heating Repair in University Park/heating-repair-university-park-tx
- Ductwork in University Park/ductwork-university-park-tx
- Emergency HVAC in University Park/emergency-hvac-university-park-tx
- Tune-Up in University Park/tune-up-maintenance-university-park-tx
Nearby Cities We Also Serve
Same flat-rate heating replacementpricing across every city we cover. If you're in a University Park-adjacent neighborhood, these pages have local details for your ZIP.
- Heating Replacement in Highland Park/heating-replacement-highland-park-tx
- Heating Replacement in Dallas/heating-replacement-dallas-tx
- Heating Replacement in Addison/heating-replacement-addison-tx
- Heating Replacement in Farmers Branch/heating-replacement-farmers-branch-tx
- Heating Replacement in Richardson/heating-replacement-richardson-tx
- Heating Replacement in Carrollton/heating-replacement-carrollton-tx
From Our Blog
Deeper context on heating replacement written by Omar Jacobo (EPA 608 #2396328).
- Ductwork Problems? How Bad Ducts Cost You MoneyLeaky, damaged ductwork wastes 20-30% of your cooled air. Learn the signs, repair costs, and when to replace. DFW homes. Call (469) 254-0548…Read article →
- Flower Mound HVAC: Why Your Upstairs Won't Cool DownFlower Mound homeowners: why your upstairs is hot, what it costs to fix, and when to replace. Larger homes need special attention. Call (469…Read article →
- 5 Signs Your Furnace Needs Repair (Before Winter Hits)5 warning signs your furnace needs repair — with exact DFW repair costs. Never repair a cracked heat exchanger. Call (469) 254-0548.Read article →
What Do University Park Homeowners Ask About Heating Replacement?
Should I get a furnace or heat pump in University Park?
Depends on your existing setup and the closet handler space. If you have natural gas already and a properly vented mechanical closet, a 96% AFUE two-stage furnace is typically cheapest to operate through Dallas's 20-30 freeze nights. If you're doing a full renovation, going electric, or want to simplify with one system for heating and cooling, a modern variable-speed heat pump works well in UP and qualifies for federal tax credits. We run both numbers so you can compare.
How much does heating replacement cost in University Park, TX?
Full system replacement runs $8,000-$20,000+ depending on tier and whether it's gas furnace, heat pump, or electric. Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$20,000+. Heat pump adds $2,000 over the base tier; 10-year labor warranty adds $3,500. Multi-zone setups in larger UP homes can run higher.
What size furnace do I need for my University Park home?
It depends on square footage, insulation, window area, and ductwork — not just a rule of thumb. We run a Manual J load calculation on every replacement, which is the ACCA standard for sizing. University Park homes from the 1920s-1950s often have less insulation and more glazing than modern builds, which affects the calc. Oversizing is a bigger problem than undersizing — it causes short cycling, temperature swings, and humidity issues, all of which are hard on original plaster walls and historic finishes.
How long does a new furnace or heat pump last in University Park?
Gas furnaces: 15-20 years with annual maintenance. Heat pumps: 12-15 years because they run year-round for both heating and cooling. Variable-speed equipment tends to last longer than single-stage because it doesn't cycle on/off as hard. UP homes on their 3rd or 4th system often see equipment fail earlier when prior installs were undersized or improperly vented — Frosty Club Premium ($300/yr) includes 2 tune-ups which extend equipment life significantly.
Do you offer financing for heating replacement in University Park?
Yes — Optimus, Synchrony, and GreenSky with $0 down on approved credit. 50% deposit at booking, balance on completion. Application takes 5 minutes and most University Park homeowners get approved same-day. Monthly payments work out to roughly 1/60th of the system price.
How Do I Get Started with Heating Replacement in University Park?
Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.
Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.
Written by
By Omar Jacobo
Texas Licensed HVAC Contractor #TACLA126718E · EPA #2396328
Co-Owner of Frosty's HVAC LLC, serving DFW since 2018. Learn more
Ready For Reliable HVAC Service?
Request service online, call for same-day help, or see your replacement price.
Call Now