Frosty's HVAC
4.9 stars · 94 Google reviews

Heating Replacement in Highland Village, TX

Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.

Licensed TACLA126718E
EPA 608 Universal Certified
Family-Owned Since 2018
94 Reviews · 4.9 Stars

How Much Does Heating Replacement Cost in Highland Village?

Heating replacement in Highland Village runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.

Stay Cool

Goodman · 15 SEER2 · Single-stage

$8,000-$14,000

1-year labor warranty

  • Frosty Thermostat (smart WiFi thermostat)
  • New disconnect box
  • Electrical whip
  • Overflow condensate shutoff
Most Popular

Stay Frosty

Carrier · 18 SEER2 · Dual-stage

$12,000-$18,000

2-year labor warranty

  • Everything in Stay Cool
  • Ductwork inspection + sealing (up to 5 connections)

It's A Frosty Life

Trane · 20+ SEER2 · Variable speed

$16,000-$20,000+

5-year labor warranty

  • Everything in Stay Frosty
  • Full ductwork inspection + sealing
  • Vibration isolation mounts
  • 1-year Frosty Club included ($99 value)

Add-on: 10-Year Labor Warranty +$3,500

Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)

Financing Available

$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.

See Financing Options

What's Included With Every Highland Village Heating Replacement?

Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.

Frosty Thermostat (smart WiFi thermostat — our brand, included free)
New electrical whip and disconnect (if needed)
Condensate drain line treatment (90%+ AFUE units)
Combustion analysis after install (gas furnaces)
Copper line inspection (replaced if compromised, for heat pumps)
Load calculation (Manual J)
City permit pulled under TACLA126718E
Full cleanup + haul-away of old equipment
R-454B or R-32 refrigerant (heat pump installs — never R-410A for new)
EPA 608 Universal certified install crew
Post-install walkthrough + WiFi thermostat setup
Manufacturer warranty registration

Why Highland VillageHomeowners Choose Frosty's for Heating Replacement

Highland Village heating replacement is concentrated on 1990s-2010s customs whose original 80% AFUE gas furnaces are now hitting 15-20 years. Upgrading to a 96% AFUE condensing furnace isn't a drop-in swap — condensing units require PVC intake and exhaust runs with a proper condensate drain, so we plan the flue path with the homeowner before committing to a tier. On lake-view or finished-wall installations in Chinn Chapel and Highland Shores, routing the new PVC without damaging aesthetics takes thought. We walk the path with you on the estimate visit.

Most Highland Village homes have natural gas service which usually makes a 96% AFUE gas furnace cheaper to operate than a heat pump across Denton County's 20-30 annual freeze nights. But on newer all-electric waterfront builds, a variable-speed heat pump from Trane or Carrier works well in the climate with electric heat strips as backup below 15°F. Heat pumps add $2,000 over the base tier but often qualify for federal tax credits. We run gas-vs-heat-pump 10-year cost comparisons on every replacement.

Every Highland Village heating replacement includes: new disconnect and electrical whip if needed, proper flue venting or heat pump line set, City of Highland Village permit, Frosty Thermostat with dehumidification mode (our smart WiFi thermostat — not Nuve), condensate management on the new coil, vibration isolation on variable-speed equipment, and full cleanup/haul-away. Labor warranty matches tier: 1-year on Stay Cool, 2-year on Stay Frosty, 5-year on It's A Frosty Life. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit.

Neighborhoods we serve in Highland Village: Chinn Chapel, Highland Shores, Castlewood, The Bluffs, Lewisville Lake waterfront, Flower Mound border

Why Our Credentials Matter for Heating Installation

TACLA126718E

Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.

EPA 608 Universal

Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.

DOE Efficiency Partner

All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.

Learn more about our credentials on our About page or visit omar-jacobo.com.

Heating Replacement FAQ for Highland Village, TX

Should I get a furnace or heat pump in Highland Village?

Depends on your existing setup. If you have natural gas service (most Chinn Chapel, Highland Shores, and Castlewood homes), a 96% AFUE two-stage furnace is typically cheapest to operate across Highland Village's 20-30 freeze nights. If you're in an all-electric newer waterfront build without gas service, a variable-speed heat pump works well in Denton County and may qualify for federal tax credits. We run both numbers.

How much does heating replacement cost in Highland Village, TX?

Full system replacement runs $8,000-$20,000+ depending on tier. Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$20,000+. Heat pump adds $2,000; 10-year labor warranty adds $3,500.

What size furnace do I need for my Highland Village home?

Depends on square footage, insulation, window exposure (big-glass lake-view homes have higher loads), and ductwork condition. We run a Manual J load calculation on every replacement. Chinn Chapel customs in the 3,000-4,500 sqft range typically need 80,000-100,000 BTU furnaces; larger Castlewood lake-view homes often need 100,000-120,000 BTU. Oversizing causes short cycling and humidity issues — exactly what we're trying to avoid near the lake.

How long does a new furnace or heat pump last in Highland Village?

Gas furnaces: 15-20 years with annual maintenance. Heat pumps: 12-15 years because they run year-round. Two-stage and variable-speed equipment tends to last longer than single-stage. Frosty Club Premium ($300/yr) includes 2 tune-ups which extend equipment life significantly.

Do you pull permits for Highland Village heating replacements?

Yes — we pull a City of Highland Village permit on every gas furnace or heat pump replacement. The inspector typically comes out within 2-3 weeks. Permit fees are included in the flat-rate quote. Unpermitted work fails at resale inspection and can void equipment warranties.

Ready for a New Heating System in Highland Village?

Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.

Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.

OJ

Written by

Omar Jacobo

EPA 608 Certified Technician (#2396328) | Co-Owner, Frosty's HVAC LLC

Omar has been serving local homeowners since 2018. Learn more

// Ready When You Are

Ready For Reliable HVAC Service?

Request service online, call for same-day help, or see your replacement price.

Call NowBookText Us