Frosty's HVAC
4.9 stars · 99 Google reviews

Heating Replacement in Corinth, TX

Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.

Licensed TACLA126718E
EPA 608 Universal Certified
Family-Owned Since 2018
99 Reviews · 4.9 Stars

Where in Corinth Do We Install Furnaces and Heat Pumps?

Our team services Corinth from our Farmers Branch base — 25 miles via I-35E North, roughly 35 minutes. We cover 76208 and 76210 including Corinth Meadows, Lake Sharon, Shady Oaks, Corinth Shores, I-35E corridor, and Lake Dallas border. Corinth sits in Denton County.

Now serving Corinth

Corinth is about 35 minutes from our Farmers Branch shop via I-35E. Business-hours response is typically within 2 hours for 76208 addresses. We carry coil-cleaning chemistry rated for hard-water mineral scale (not just standard biofilm cleaners), plus the standard capacitors and contactors for the mid-life Corinth Meadows and Lake Sharon housing stock. On replacement quotes we ask which utility or MUD serves the address before sizing — water source materially affects long-term coil life on this side of Denton County.

Corinth climate and heating context

Corinth's water service is a patchwork — the city's own utility, multiple Municipal Utility Districts (Lake Cities, Mustang and others), and lingering pockets of well-and-septic on older parcels along the Lake Dallas border. The hard groundwater across these supply zones leaves heavy mineral scale on indoor evaporator coils when condensate evaporates back across the fins, dragging coil heat-transfer efficiency down a few percent every year and eventually pinning compressors at higher head pressure than design. Calcium-carbonate 'white frost' patterns on Corinth indoor coils are noticeably more common than on identical equipment ten miles south on Dallas city water. Whole-home softening helps, but most Corinth homes simply need annual coil cleaning to stay ahead of the scale build-up before it eats efficiency.

How Much Does Heating Replacement Cost in Corinth?

Heating replacement in Corinth runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.

Stay Cool

Goodman · 15 SEER2 · Single-stage

$8,000-$14,000

1-year labor warranty

  • Frosty Thermostat (smart WiFi thermostat)
  • New disconnect box
  • Electrical whip
  • Overflow condensate shutoff
Most Popular

Stay Frosty

Carrier · 18 SEER2 · Dual-stage

$12,000-$18,000

2-year labor warranty

  • Everything in Stay Cool
  • Ductwork inspection + sealing (up to 5 connections)

It's A Frosty Life

Trane · 20+ SEER2 · Variable speed

$16,000-$20,000+

5-year labor warranty

  • Everything in Stay Frosty
  • Full ductwork inspection + sealing
  • Vibration isolation mounts
  • 1-year Frosty Club included ($99 value)

Add-on: 10-Year Labor Warranty +$3,500

Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)

Financing Available

$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.

See Financing Options

What's Included With Every Corinth Heating Replacement?

Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.

Frosty Thermostat (smart WiFi thermostat — our brand, included free)
New electrical whip and disconnect (if needed)
Condensate drain line treatment (90%+ AFUE units)
Combustion analysis after install (gas furnaces)
Copper line inspection (replaced if compromised, for heat pumps)
Load calculation (Manual J)
City permit pulled under TACLA126718E
Full cleanup + haul-away of old equipment
R-454B or R-32 refrigerant (heat pump installs — never R-410A for new)
EPA 608 Universal certified install crew
Post-install walkthrough + WiFi thermostat setup
Manufacturer warranty registration

Why Do Corinth Homeowners Choose Frosty's for Heating Replacement?

Corinth heating replacement is concentrated on 1990s-2010s homes whose original 80% AFUE gas furnaces are now hitting 15-20 years. Upgrading to a 96% AFUE condensing furnace isn't a drop-in swap — condensing units require PVC intake and exhaust runs with a proper condensate drain, so we plan the flue path with the homeowner before committing to a tier. On attic-mounted systems in Corinth Meadows and Lake Sharon, routing the new PVC through existing roof penetrations takes thought. We walk the path with you on the estimate visit.

Most Corinth homes have natural gas service which usually makes a 96% AFUE gas furnace cheaper to operate than a heat pump across Denton County's 20-30 annual freeze nights. But on newer all-electric Corinth Shores builds, a variable-speed heat pump from Trane or Carrier works well in the climate with electric heat strips as backup below 15°F. Heat pumps add $2,000 over the base tier but often qualify for federal tax credits. We run gas-vs-heat-pump 10-year cost comparisons on every replacement.

Every Corinth heating replacement includes: new disconnect and electrical whip if needed, proper flue venting or heat pump line set, City of Corinth permit, Frosty Thermostat with dehumidification mode (our smart WiFi thermostat), condensate management on the new coil, vibration isolation on variable-speed equipment, and full cleanup/haul-away. Labor warranty matches tier: 1-year on Stay Cool, 2-year on Stay Frosty, 5-year on It's A Frosty Life. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit.

Neighborhoods we serve in Corinth: Corinth Meadows, Lake Sharon, Shady Oaks, Corinth Shores, I-35E corridor, Lake Dallas border

Why Should I Trust Frosty's Credentials for Heating Installation?

Because a new furnace install requires a city permit pulled under a licensed contractor — TACLA126718E. Combine that with EPA 608 #2396328 for heat-pump refrigerant work and 99 Google reviews at 4.9 stars, and every credential below is independently verifiable before install day.

TACLA126718E

Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.

EPA 608 Universal

Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.

DOE Efficiency Partner

All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.

Learn more about our credentials on our About page or visit omar-jacobo.com.

What Do Corinth Homeowners Ask About Heating Replacement?

Should I get a furnace or heat pump in Corinth?

Depends on your existing setup. If you have natural gas service (most Corinth homes do), a 96% AFUE two-stage furnace is typically cheapest to operate across Corinth's 20-30 freeze nights. If you're in an all-electric newer build without gas service, a variable-speed heat pump works well in Denton County and may qualify for federal tax credits. We run both numbers.

How much does heating replacement cost in Corinth, TX?

Full system replacement runs $8,000-$20,000+ depending on tier. Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$20,000+. Heat pump adds $2,000; 10-year labor warranty adds $3,500.

What size furnace do I need for my Corinth home?

Depends on square footage, insulation, window exposure, and ductwork condition. We run a Manual J load calculation on every replacement. Corinth Meadows and Lake Sharon 2,500-3,500 sqft homes typically need 80,000-100,000 BTU furnaces; larger homes need 100,000-120,000 BTU. Oversizing causes short cycling and humidity issues — a real problem on lake-corridor Corinth homes.

How long does a new furnace or heat pump last in Corinth?

Gas furnaces: 15-20 years with annual maintenance. Heat pumps: 12-15 years because they run year-round. Two-stage and variable-speed equipment tends to last longer than single-stage. Frosty Club Premium ($300/yr) includes 2 tune-ups which extend equipment life significantly.

Do you pull permits for Corinth heating replacements?

Yes — we pull a City of Corinth permit on every gas furnace or heat pump replacement. The inspector typically comes out within 2-3 weeks. Permit fees are included in the flat-rate quote. Unpermitted work fails at resale inspection and can void equipment warranties.

How Do I Get Started with Heating Replacement in Corinth?

Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.

Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.

OJ

Written by

By

Texas Licensed HVAC Contractor #TACLA126718E · EPA #2396328

Co-Owner of Frosty's HVAC LLC, serving DFW since 2018. Learn more

// Ready When You Are

Ready For Reliable HVAC Service?

Request service online, call for same-day help, or see your replacement price.

Call NowBookText Us