Frosty's HVAC
4.9 stars · 99 Google reviews

Heating Replacement in Pantego, TX

Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.

Licensed TACLA126718E
EPA 608 Universal Certified
Family-Owned Since 2018
99 Reviews · 4.9 Stars

Where in Pantego Do We Install Furnaces and Heat Pumps?

Our team services Pantego from our Farmers Branch base — 30 miles via SH-183 to Loop 820 South, roughly 45 minutes. We cover 76013 including Park Row, Pantego Meadows, Stonegate, Pioneer Parkway, Bowen Road, and Arkansas Lane corridor. Pantego sits in Tarrant County.

Now serving Pantego

Pantego is about 45 minutes from our Farmers Branch shop via SH-183 and Loop 820. Same-day calls across 76013 are routine. We carry error-code cheat sheets for Trane XV20i and Carrier Greenspeed 25VNA0 variable-speed condensers because they're common enough here to keep them truck-stocked, plus dual-system diagnostic protocols since most Pantego homes run separate upstairs and downstairs equipment.

Pantego climate and heating context

Pantego is a 2,400-resident independent town entirely island-ed inside Arlington — small but consistently upscale. Housing in Park Row, Pantego Meadows, and Stonegate is 1960s-80s ranch-estate on half-acre-plus lots, with HVAC equipment dominated by Trane XV/XL, Carrier Infinity, and Lennox Signature 10-20 years old. Larger lots and dual-system installs (separate upstairs/downstairs equipment, sometimes different brands per level) are common — diagnostic workflow leans heavily toward communication board faults and TXV problems rather than basic capacitor chasing.

How Much Does Heating Replacement Cost in Pantego?

Heating replacement in Pantego runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.

Stay Cool

Goodman · 15 SEER2 · Single-stage

$8,000-$14,000

1-year labor warranty

  • Frosty Thermostat (smart WiFi thermostat)
  • New disconnect box
  • Electrical whip
  • Overflow condensate shutoff
Most Popular

Stay Frosty

Carrier · 18 SEER2 · Dual-stage

$12,000-$18,000

2-year labor warranty

  • Everything in Stay Cool
  • Ductwork inspection + sealing (up to 5 connections)

It's A Frosty Life

Trane · 20+ SEER2 · Variable speed

$16,000-$20,000+

5-year labor warranty

  • Everything in Stay Frosty
  • Full ductwork inspection + sealing
  • Vibration isolation mounts
  • 1-year Frosty Club included ($99 value)

Add-on: 10-Year Labor Warranty +$3,500

Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)

Financing Available

$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.

See Financing Options

What's Included With Every Pantego Heating Replacement?

Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.

Frosty Thermostat (smart WiFi thermostat — our brand, included free)
New electrical whip and disconnect (if needed)
Condensate drain line treatment (90%+ AFUE units)
Combustion analysis after install (gas furnaces)
Copper line inspection (replaced if compromised, for heat pumps)
Load calculation (Manual J)
City permit pulled under TACLA126718E
Full cleanup + haul-away of old equipment
R-454B or R-32 refrigerant (heat pump installs — never R-410A for new)
EPA 608 Universal certified install crew
Post-install walkthrough + WiFi thermostat setup
Manufacturer warranty registration

Why Do Pantego Homeowners Choose Frosty's for Heating Replacement?

Pantego heating replacement is a different conversation than in surrounding Tarrant suburbs. This 2,400-resident micro-muni sits entirely inside Arlington, and the half-acre-plus ranch-estates in Park Row, Pantego Meadows, and Stonegate were typically built with premium Trane, Carrier Infinity, or Lennox Elite equipment. When I replace a Pantego furnace, the homeowner is usually choosing between a 96% AFUE two-stage gas furnace, a variable-speed modulating furnace (Trane S9V2-VS, Carrier Infinity 98, Lennox SLP99V), or a full dual-fuel heat pump + gas backup system. Those 1970s-era gravity flues can't be reused for condensing equipment — we run new PVC intake and exhaust through a sidewall or roof penetration, and on Pantego's exteriors the penetration route gets walked with the homeowner before we quote anything.

Most Pantego homes sit on Atmos gas service, which makes a matched 96% AFUE gas furnace + AC replacement the most economical long-term choice. Dual-fuel is my recommendation for Pantego's larger homes where the homeowner wants efficiency on mild winter days (heat pump) plus full-BTU gas heat when a polar-vortex drop hits below 35°F. The February 2021 freeze is still fresh in memory on this side of Tarrant County, and dual-fuel gives you a true belt-and-suspenders setup. Per Energy.gov, federal 25C tax credits cover up to $2,000 on qualifying heat pumps, which a Pantego dual-fuel install typically captures. New Pantego installs now specify R-454B or R-32 refrigerant per the EPA AIM Act phase-down of R-410A.

Every Pantego heating replacement includes: Manual J load calculation per ACCA standards (run independently on each zone for dual-system homes), new disconnect and electrical whip, proper PVC flue venting or heat pump line set, Town of Pantego permit, Frosty Thermostat (our smart WiFi thermostat), condensate management on the new coil, line-voltage tie-ins, and full cleanup and haul-away. Labor warranty matches the tier: 1-year Stay Cool, 2-year Stay Frosty, 5-year It's A Frosty Life. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit, 50% deposit at booking, balance on completion.

Neighborhoods we serve in Pantego: Park Row, Pantego Meadows, Stonegate, Pioneer Parkway, Bowen Road, Arkansas Lane corridor, Town Hall area, surrounded by central Arlington

Why Should I Trust Frosty's Credentials for Heating Installation?

Because a new furnace install requires a city permit pulled under a licensed contractor — TACLA126718E. Combine that with EPA 608 #2396328 for heat-pump refrigerant work and 99 Google reviews at 4.9 stars, and every credential below is independently verifiable before install day.

TACLA126718E

Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.

EPA 608 Universal

Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.

DOE Efficiency Partner

All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.

Learn more about our credentials on our About page or visit omar-jacobo.com.

What Do Pantego Homeowners Ask About Heating Replacement?

Furnace, heat pump, or dual-fuel — which makes the most sense in Pantego?

For Pantego homes with Atmos gas service (most Park Row, Pantego Meadows, and Stonegate properties), a 96% AFUE two-stage or variable-speed furnace is typically cheapest over 20 years. Dual-fuel (heat pump + gas backup) is my strong recommendation for Pantego's larger homes — heat pump efficiency on mild days and gas heat for sub-35°F stretches. Pure electric heat pump makes sense when gas service isn't present. We run all three payback calculations.

How much does heating replacement cost in Pantego, TX?

Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$26,000 depending on tonnage. Heat pump adds $2,000; 10-year labor warranty adds $3,500. Dual-system Pantego homes (two furnaces) typically land at 1.7-1.9x a single-system quote because we're installing and commissioning two complete packages.

What size furnace do I need for my Pantego home?

Sizing requires an ACCA Manual J load calculation — square footage alone is not enough. Most 1960s-80s Pantego ranch-estates in the 2,500-3,500 sqft range land at 80,000-100,000 BTU output, or dual 60,000-80,000 BTU units if the home runs upstairs/downstairs zones independently. Oversized furnaces short-cycle, over-dry winter air, and burn out ignition components earlier.

Do you install modulating variable-speed furnaces in Pantego?

Yes — modulating variable-speed equipment (Trane S9V2-VS, Carrier Infinity 98, Lennox SLP99V) is what we install on It's A Frosty Life tier jobs and as a step-up option on Stay Frosty. Modulating furnaces adjust BTU output in small increments so they run longer at lower firing rates, which improves comfort and humidity control substantially in Pantego's half-acre homes where supply-air runs are longer.

How long will a new furnace or heat pump last in Pantego?

Gas furnaces: 18-22 years with twice-a-year tune-ups on this tier of equipment. Heat pumps: 12-15 years because they run year-round for both heating and cooling. Variable-speed equipment generally outlasts single-stage because it doesn't cycle as hard. Frosty Club Premium ($300/yr) includes the two tune-ups per year that keep warranty intact and realize that full lifespan — Pantego homes with maintained equipment regularly hit 20+ years.

Does the federal 25C tax credit apply to Pantego heat pump installs?

Yes — per Energy.gov, the federal 25C Energy Efficient Home Improvement Credit covers up to $2,000 on qualifying heat pump installs and up to $600 on qualifying high-efficiency furnaces. We install equipment that meets the CEE Highest Efficiency tier required for the credit and provide the AHRI match certificate and manufacturer documentation you'll need at tax time.

How Do I Get Started with Heating Replacement in Pantego?

Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.

Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.

OJ

Written by

By

Texas Licensed HVAC Contractor #TACLA126718E · EPA #2396328

Co-Owner of Frosty's HVAC LLC, serving DFW since 2018. Learn more

// Ready When You Are

Ready For Reliable HVAC Service?

Request service online, call for same-day help, or see your replacement price.

Call NowBookText Us