Frosty's HVAC
4.9 stars · 94 Google reviews

Heating Replacement in Dalworthington Gardens, TX

Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.

Licensed TACLA126718E
EPA 608 Universal Certified
Family-Owned Since 2018
94 Reviews · 4.9 Stars

How Much Does Heating Replacement Cost in Dalworthington Gardens?

Heating replacement in Dalworthington Gardens runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.

Stay Cool

Goodman · 15 SEER2 · Single-stage

$8,000-$14,000

1-year labor warranty

  • Frosty Thermostat (smart WiFi thermostat)
  • New disconnect box
  • Electrical whip
  • Overflow condensate shutoff
Most Popular

Stay Frosty

Carrier · 18 SEER2 · Dual-stage

$12,000-$18,000

2-year labor warranty

  • Everything in Stay Cool
  • Ductwork inspection + sealing (up to 5 connections)

It's A Frosty Life

Trane · 20+ SEER2 · Variable speed

$16,000-$20,000+

5-year labor warranty

  • Everything in Stay Frosty
  • Full ductwork inspection + sealing
  • Vibration isolation mounts
  • 1-year Frosty Club included ($99 value)

Add-on: 10-Year Labor Warranty +$3,500

Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)

Financing Available

$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.

See Financing Options

What's Included With Every Dalworthington Gardens Heating Replacement?

Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.

Frosty Thermostat (smart WiFi thermostat — our brand, included free)
New electrical whip and disconnect (if needed)
Condensate drain line treatment (90%+ AFUE units)
Combustion analysis after install (gas furnaces)
Copper line inspection (replaced if compromised, for heat pumps)
Load calculation (Manual J)
City permit pulled under TACLA126718E
Full cleanup + haul-away of old equipment
R-454B or R-32 refrigerant (heat pump installs — never R-410A for new)
EPA 608 Universal certified install crew
Post-install walkthrough + WiFi thermostat setup
Manufacturer warranty registration

Why Dalworthington GardensHomeowners Choose Frosty's for Heating Replacement

Dalworthington Gardens heating replacement skews upscale — Gardens South, Lake DWG, and Bowen Road homeowners typically replace 15-25 year old high-end Trane XL, Carrier Infinity, or Lennox Elite furnaces with modern 96% AFUE 2-stage or variable-speed equipment. Those original 1970s-80s gravity-vent flues in older DWG homes can't be reused for condensing furnaces, so we run new PVC intake and exhaust through a sidewall or roof penetration. On DWG's manicured garden-lot exteriors, penetration aesthetics matter — we plan the route with the homeowner and keep PVC terminations discreet and away from mature landscaping.

Most DWG homes have natural gas service from Atmos, so a matched 96% AFUE gas furnace paired with a 15-20 SEER2 AC is usually the best economic choice. Dual-fuel (heat pump + gas backup) is also a popular DWG option because larger garden-lot homes benefit from heat pump efficiency during mild winter days while keeping gas heat for sub-35°F stretches. Larger DWG estates are also strong candidates for zoned variable-speed systems that serve upstairs, downstairs, and guest-wing zones independently from one piece of equipment.

Every DWG heating replacement includes: new disconnect and electrical whip (if needed), proper flue venting or heat pump line set, Town of Dalworthington Gardens permit, Frosty Thermostat (our smart WiFi thermostat — not Nuve), condensate management on the new coil, and full cleanup/haul-away. Labor warranty matches the tier: 1-year on Stay Cool, 2-year on Stay Frosty, 5-year on It's A Frosty Life. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit.

Neighborhoods we serve in Dalworthington Gardens: Gardens South, Lake DWG, Pioneer Parkway, Gibbins Road, Bowen Road, inside south Arlington

Why Our Credentials Matter for Heating Installation

TACLA126718E

Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.

EPA 608 Universal

Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.

DOE Efficiency Partner

All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.

Learn more about our credentials on our About page or visit omar-jacobo.com.

Heating Replacement FAQ for Dalworthington Gardens, TX

Should I get a furnace, heat pump, or dual-fuel in Dalworthington Gardens?

If you have Atmos gas service (almost every DWG address does), a 96% AFUE two-stage furnace is typically cheapest to operate. Dual-fuel (heat pump + gas backup) is a strong DWG option because it combines heat pump efficiency for mild weather with gas heat for sub-35°F stretches. Pure heat pump works best for all-electric DWG homes. We run all three numbers before recommending.

How much does heating replacement cost in Dalworthington Gardens, TX?

Full system replacement runs $8,000-$22,000+ depending on tier. Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $11,500-$18,000, It's A Frosty Life (Trane 20+ SEER2) $15,500-$22,000+. Heat pump adds $2,000; 10-year labor warranty adds $3,500. Dual-system DWG estates run about 1.7-1.9x a single-system price.

What size furnace do I need for my DWG home?

Depends on square footage, insulation, window exposure, and ductwork — not a rule of thumb. We run a Manual J load calculation, the ACCA standard, on every replacement. Most 2,500-4,000 sqft DWG ranch-estates need 80,000-120,000 BTU furnaces, or dual systems with smaller equipment on each level. Oversizing causes short cycling and humidity problems.

How long does a new furnace or heat pump last in DWG?

Gas furnaces: 15-20 years with annual maintenance. Heat pumps: 12-15 years. Variable-speed equipment tends to last longer than single-stage because it runs at lower loads most of the time. DWG homeowners who sign up for Frosty Club Premium ($300/yr) and get 2 tune-ups a year regularly see 20+ years from their equipment.

Do you offer financing for heating replacement in Dalworthington Gardens?

Yes — Optimus, Synchrony, and GreenSky with $0 down on approved credit. 50% deposit at booking, balance on completion. Applications take 5 minutes and most DWG homeowners get approved same-day. Monthly payments work out to roughly 1/60th of the system price.

Ready for a New Heating System in Dalworthington Gardens?

Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.

Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.

OJ

Written by

Omar Jacobo

EPA 608 Certified Technician (#2396328) | Co-Owner, Frosty's HVAC LLC

Omar has been serving local homeowners since 2018. Learn more

// Ready When You Are

Ready For Reliable HVAC Service?

Request service online, call for same-day help, or see your replacement price.

Call NowBookText Us