Heating Replacement in Bedford, TX
Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.
How Much Does Heating Replacement Cost in Bedford?
Heating replacement in Bedford runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.
Stay Cool
Goodman · 15 SEER2 · Single-stage
1-year labor warranty
- Frosty Thermostat (smart WiFi thermostat)
- New disconnect box
- Electrical whip
- Overflow condensate shutoff
Stay Frosty
Carrier · 18 SEER2 · Dual-stage
2-year labor warranty
- Everything in Stay Cool
- Ductwork inspection + sealing (up to 5 connections)
It's A Frosty Life
Trane · 20+ SEER2 · Variable speed
5-year labor warranty
- Everything in Stay Frosty
- Full ductwork inspection + sealing
- Vibration isolation mounts
- 1-year Frosty Club included ($99 value)
Add-on: 10-Year Labor Warranty +$3,500
Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)
Financing Available
$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.
See Financing OptionsWhat's Included With Every Bedford Heating Replacement?
Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.
Why BedfordHomeowners Choose Frosty's for Heating Replacement
Bedford heating replacements skew older than most DFW cities we serve. In Meadowpark, Stonegate, and the Central Drive-adjacent residential pockets, we mostly replace 18-28 year old gas furnaces with modern 96% AFUE single-stage or two-stage units. For 1970s-90s Bedford ranch homes, I almost always recommend a matched system (furnace + AC in the same tier) because mixing a new high-efficiency AC with an old furnace means the variable-speed blower can't modulate properly and you lose most of the efficiency you just paid for.
Bedford Forest and Harwood homeowners more often ask me about heat pumps, and in Bedford's climate — 20-30 freeze nights, but 200+ cooling days a year — a modern variable-speed heat pump (Trane, Carrier) genuinely makes sense. You get heating and cooling from a single system, efficiency down to about 15°F ambient (below that, the electric heat strips kick in to supplement), and you eliminate the annual combustion safety inspection worry because there's no gas burning. Heat pumps add about $2,000 over the base tier but often qualify for federal tax credits (check with your CPA) and Oncor rebates.
Every heating replacement in Bedford includes: new disconnect and electrical whip (if needed), proper flue venting or heat pump line set, city permit, Frosty Thermostat (our smart WiFi thermostat — not Nuve), condensate management on the new coil, and full cleanup with haul-away. Labor warranty matches the tier: 1-year on Stay Cool, 2-year on Stay Frosty, 5-year on It's A Frosty Life. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit, 50% deposit at booking.
Neighborhoods we serve in Bedford: Meadowpark, Stonegate, Central Drive, Harwood, Bedford Forest
Why Our Credentials Matter for Heating Installation
TACLA126718E
Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.
EPA 608 Universal
Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.
DOE Efficiency Partner
All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.
Learn more about our credentials on our About page or visit omar-jacobo.com.
Heating Replacement FAQ for Bedford, TX
Should I get a furnace or heat pump in Bedford?
Depends on your existing setup and energy preferences. If you have natural gas to the house already (common in older Meadowpark and Stonegate), a 96% AFUE two-stage furnace is typically cheapest to operate through Bedford's 20-30 freeze nights. If you're electric-only or want the simplicity of one system for heating and cooling, a modern variable-speed heat pump works well in Bedford's climate and qualifies for federal tax credits. We run both numbers so you can compare.
How much does heating replacement cost in Bedford, TX?
Full system replacement runs $8,000-$20,000+ depending on tier and whether it's gas furnace, heat pump, or electric. Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$20,000+. Heat pump adds $2,000 over the base tier; 10-year labor warranty adds $3,500.
What size furnace do I need for my Bedford home?
Depends on square footage, insulation, window area, and ductwork condition — not a rule of thumb. We run a Manual J load calculation on every replacement, which is the ACCA standard for sizing. Bedford homes in the 1,800-2,800 sqft range typically need 60,000-80,000 BTU furnaces. Oversizing is a bigger problem than undersizing — it causes short cycling, temperature swings, and humidity issues.
How long does a new furnace or heat pump last in Bedford?
Gas furnaces: 15-20 years with annual maintenance. Heat pumps: 12-15 years because they run year-round for both heating and cooling. Variable-speed equipment tends to last longer than single-stage because it doesn't cycle on/off as hard. Frosty Club Premium ($300/yr) includes 2 tune-ups which noticeably extend equipment life — critical in Bedford's older housing stock.
Do you offer financing for heating replacement in Bedford?
Yes — Optimus, Synchrony, and GreenSky with $0 down on approved credit. 50% deposit at booking, balance on completion. Application takes 5 minutes and most Bedford homeowners get approved same-day. Monthly payments work out to roughly 1/60th of the midpoint system price.
Related Services & Resources
Ready for a New Heating System in Bedford?
Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.
Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.
Written by
Omar Jacobo
EPA 608 Certified Technician (#2396328) | Co-Owner, Frosty's HVAC LLC
Omar has been serving local homeowners since 2018. Learn more
Ready For Reliable HVAC Service?
Request service online, call for same-day help, or see your replacement price.
Call Now