Ductwork Services in Murphy, TX
Leaky ducts waste 20-30% of your cooling and heating. Flat-rate residential duct sealing, repair, and replacement in Murphy. Static pressure diagnostic $85 (waived with repair). Licensed TACLA126718E, EPA 608 Universal certified, family-owned since 2018.
How Much Does Ductwork Cost in Murphy?
Ductwork in Murphystarts at $85 for a static pressure diagnostic (waived with any repair). Most homes need 2-5 targeted repairs, not a full duct redesign. We're flat-rate, which means the price quoted before we start is the price you pay at the end. Frosty Club members save 10-15% on every job.
| Service | Regular Price | Frosty Club Member |
|---|---|---|
| Diagnostic / static pressure test(Waived with repair) | $85 | $72.25 |
| Duct sealing (per repair) | $350 | $297.50 |
| Full duct replacement (per run) | $700 | $595 |
| Plenum replacement | $1,200 – $1,500 | $1,020 – $1,275 |
| Basic tune-up (related upsell) | $150 | $127.50 |
Leaky Ducts Are an Indoor Air Quality Problem
Per the EPA, indoor air is 2-5x more polluted than outdoor air — and leaky ducts are one of the main causes. Every crack, loose connection, and failed tape seal pulls unfiltered attic air (dust, pollen, insulation fibers, rodent droppings) directly into your supply stream. Sealing and replacing bad runs is one of the highest-impact IAQ improvements we make.
Save More with Frosty Club
Basic ($99/yr):10% off all services | Premium ($300/yr): 15% off + $500 repair credit + 2 free tune-ups/year
Join Frosty ClubWhat Are the Most Common Ductwork Problems in Murphy?
Leaky and undersized ducts are the single most-missed cause of comfort problems I see in DFW homes. Here's what we find most often on Murphy diagnostic calls, and what each one typically costs to fix.
Uneven temperatures room-to-room
Classic sign of leaky supply runs or a failing zone damper. $85 diagnostic pinpoints the exact run. Fix is usually 1-3 duct repairs at $350 each.
Dusty rooms (no matter how often you clean)
Leaky returns pull unfiltered attic air straight into your supply stream. Sealing at $350 per repair stops the contamination at the source.
Climbing energy bills every summer
20-30% duct leakage means 20-30% more AC runtime. Sealing bad connections typically cuts summer bills 15-25%. 3-5 year payback.
Musty smell when the system turns on
Condensation inside flex liner leads to mold growth. You can't clean mold out of fiberglass — the only fix is replacement at $700 per run.
Rooms that never cool or heat enough
Usually undersized returns or crimped supply runs choking airflow. Manometer test during diagnostic measures exact loss. Fix varies by cause.
Allergy or asthma symptoms worse indoors
Leaky ducts pull pollen, dust, and insulation fibers into your breathing air. Duct sealing is one of the highest-impact IAQ improvements we make.
Why MurphyHomeowners Trust Frosty's for Ductwork
Murphy ductwork is showing its age in a predictable pattern. Rolling Ridge, Maxwell Creek, Brookside, and Glen Cove were built in the 1990s-2010s with flex duct that was code-compliant at the time but is now 15-25 years old and has been baking in 140-160°F attic heat every summer. The taped joints have failed, flex has sagged between hangers, and some sections near the plenum are showing inner-liner separation. Typical smoke-test readings on a 20-year-old Murphy home are 25-35% duct loss — a meaningful chunk of your Oncor bill going straight into the attic.
The Murphy-specific ductwork issue I see most is undersized returns. Mid-2000s builder-grade installs often ran a single return trunk that's too small for the square footage, and that shows up as chronic high static pressure (0.8-1.2 inches of water column instead of the target under 0.5), a blower motor that's been running hot for years, and rooms that never get enough airflow. Adding a supplemental return ($700) or upsizing the return trunk ($1,200) solves problems that sealing alone can't.
Every ductwork job in Murphy includes a before-and-after static pressure reading. Most Murphy homes I first measure are running 0.8-1.2 — way above healthy spec. After sealing or targeted replacement we bring it back under 0.5. I don't sell standalone duct insulation as a product — if the ducts are deteriorated enough to need it, they need full replacement ($700 per run), not a band-aid wrap.
Neighborhoods we serve in Murphy: Rolling Ridge, Maxwell Creek, Brookside, Glen Cove, Murphy Road area, Wylie ISD, Plano ISD
Why Our Credentials Matter for Ductwork
TACLA126718E
Texas HVAC Contractor License held by Mariafernanda Jacobo. Issued and regulated by the Texas Department of Licensing and Regulation.
EPA Indoor Air Quality
Per the U.S. EPA, leaky ducts are a primary contributor to poor indoor air quality. We measure, document, and fix.
DOE Energy Savings
The U.S. Department of Energy says duct losses can account for 20-30% of HVAC energy use. Sealing pays back fast.
Learn more about our credentials on our About page or visit omar-jacobo.com.
Ductwork FAQ for Murphy, TX
How do I know if my Murphy ducts need replacing?
Signs: rooms that never cool or heat evenly (very common in Maxwell Creek and Rolling Ridge 2-story homes), high Oncor summer bills, visible dust at supply registers, musty smells when the AC runs, or ducts visibly detached in the attic. On most 1990s-2010s Murphy builds with 20+ years of attic heat, full or partial replacement is often warranted. Sealing ($350) works on newer or better-preserved systems.
How much does duct work cost in Murphy?
Duct sealing $350 flat ($297.50 for Frosty Club members), duct replacement $700 per run ($595 for members), plenum replacement $1,200-$1,500. Most Murphy homes have 10-16 supply runs plus returns, so a full replacement typically lands at $7,000-$12,000. We quote flat-rate before starting and include before-and-after static pressure readings.
Can you seal my existing ductwork in Murphy instead of replacing it?
Depends on the condition. Murphy 1990s-2000s flex with intact material and leaky joints seals well ($350). If the inner liner has separated from the outer vapor barrier (common on 20+ year old Rolling Ridge and Maxwell Creek flex), sealing won't hold and replacement is the right call. We inspect first and give you the honest answer.
Why is my upstairs always hotter than downstairs in my Murphy 2-story?
Usually a combination of undersized upstairs supply runs and an undersized return. The fix is typically adding a supply run ($700), upsizing the return trunk, or Manual D-guided duct resizing. Adding a second thermostat or zoning damper onto undersized ducts won't fix the underlying airflow problem.
Do you insulate ductwork in Murphy?
We don't offer standalone duct insulation as a product. If ducts are deteriorated enough to need insulation attention, they need full replacement — we don't band-aid. Modern R-8 insulated flex or R-6 insulated metal is built to manufacturer spec and is what we install on every new duct run in Murphy.
Related Services & Resources
Ready to Fix Your Murphy Ductwork?
Call or request service online. We schedule duct diagnostics within 1-3 days and bring a manometer, bore-scope, and written report to every call. Flat-rate pricing — no surprises, no hourly charges.
Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E.
Written by
Omar Jacobo
EPA 608 Certified Technician (#2396328) | Co-Owner, Frosty's HVAC LLC
Omar has been serving local homeowners since 2018. Learn more
Ready For Reliable HVAC Service?
Request service online, call for same-day help, or see your replacement price.
Call Now