Frosty's HVAC
4.9 stars · 94 Google reviews

Heating Replacement in Garland, TX

Three flat-rate residential furnace & heat pump replacement tiers, $8,000-$20,000+. Gas furnace or heat pump configurations. Frosty Thermostat free. Licensed TACLA126718E. Financing with $0 down on approved credit.

Licensed TACLA126718E
EPA 608 Universal Certified
Family-Owned Since 2018
94 Reviews · 4.9 Stars

How Much Does Heating Replacement Cost in Garland?

Heating replacement in Garland runs $8,000-$20,000+ depending on tier, capacity, and whether you choose a gas furnace or a heat pump. All three tiers are flat-rate — the price I quote during the free in-home estimate is the price you pay at install. Financing available with $0 down.

Stay Cool

Goodman · 15 SEER2 · Single-stage

$8,000-$14,000

1-year labor warranty

  • Frosty Thermostat (smart WiFi thermostat)
  • New disconnect box
  • Electrical whip
  • Overflow condensate shutoff
Most Popular

Stay Frosty

Carrier · 18 SEER2 · Dual-stage

$12,000-$18,000

2-year labor warranty

  • Everything in Stay Cool
  • Ductwork inspection + sealing (up to 5 connections)

It's A Frosty Life

Trane · 20+ SEER2 · Variable speed

$16,000-$20,000+

5-year labor warranty

  • Everything in Stay Frosty
  • Full ductwork inspection + sealing
  • Vibration isolation mounts
  • 1-year Frosty Club included ($99 value)

Add-on: 10-Year Labor Warranty +$3,500

Heat pump add-on: +$2,000 over gas furnace in the same tier (combined heating + cooling)

Financing Available

$0 down on approved credit through Optimus, Synchrony, GreenSky. A $12,000 Stay Frosty heating replacement at 9.99% for 120 months runs about $159/month. 50% deposit required at booking.

See Financing Options

What's Included With Every Garland Heating Replacement?

Every tier — Stay Cool, Stay Frosty, It's A Frosty Life — includes the same baseline package. No bait-and-switch, no surprise add-ons at install. Here's exactly what you get.

Frosty Thermostat (smart WiFi thermostat — our brand, included free)
New electrical whip and disconnect (if needed)
Condensate drain line treatment (90%+ AFUE units)
Combustion analysis after install (gas furnaces)
Copper line inspection (replaced if compromised, for heat pumps)
Load calculation (Manual J)
City permit pulled under TACLA126718E
Full cleanup + haul-away of old equipment
R-454B or R-32 refrigerant (heat pump installs — never R-410A for new)
EPA 608 Universal certified install crew
Post-install walkthrough + WiFi thermostat setup
Manufacturer warranty registration

Why GarlandHomeowners Choose Frosty's for Heating Replacement

Garland furnace and heat pump replacements split along the same neighborhood lines as AC jobs. In central Garland — Duck Creek, Club Hill, Embree Park, ZIP 75040 — we mostly replace 18-25 year old gas furnaces with single-stage or two-stage 96% AFUE units. For those 1950s-70s ranch homes, I usually recommend a matched system (furnace + AC in the same tier) because mixing a new high-efficiency AC with an old furnace means the variable-speed blower can't actually modulate properly through aging gray flex ductwork — you lose most of the efficiency gain you paid for.

East Garland Firewheel and Lake Ray Hubbard area homeowners more often ask me about heat pumps. And in Garland's climate — 20-30 freeze nights, but 200+ cooling days a year — a modern variable-speed heat pump (Trane, Carrier) genuinely makes sense. You get heating and cooling from one system, efficiency down to about 15°F ambient (below that, the electric heat strips kick in), and you lose the annual gas furnace safety inspection worry because there's no combustion happening. Heat pumps add about $2,000 over the base tier but often qualify for federal tax credits (check with your tax person) and some Oncor rebates. For Lake Ray Hubbard humidity, variable-speed heat pumps also pull moisture better than single-stage gas/AC combos.

Every heating replacement in Garland includes: new disconnect and electrical whip (if needed), proper flue venting or heat pump line set, permit, Frosty Thermostat (our smart WiFi thermostat — not Nuve), condensate management on the new coil, and full cleanup/haul-away. Labor warranty matches the tier: 1-year on Stay Cool, 2-year on Stay Frosty, 5-year on It's A Frosty Life. Financing through Optimus, Synchrony, and GreenSky — $0 down on approved credit.

Neighborhoods we serve in Garland: Firewheel, Duck Creek, Club Hill, Lake Ray Hubbard

Why Our Credentials Matter for Heating Installation

TACLA126718E

Texas HVAC Contractor License held by Mariafernanda Jacobo. Every install permitted under this license with the TDLR.

EPA 608 Universal

Omar Jacobo, #2396328. Required by the U.S. EPA for all heat pump installs with R-454B, R-32, and legacy refrigerants under the 2025 phase-down.

DOE Efficiency Partner

All three tiers meet or exceed U.S. Department of Energy AFUE and SEER2 minimums. 90%+ AFUE and 20+ SEER2 tiers qualify for some utility rebates.

Learn more about our credentials on our About page or visit omar-jacobo.com.

Heating Replacement FAQ for Garland, TX

Should I get a furnace or heat pump in Garland?

Depends on your existing setup and energy preferences. If you have natural gas already (most central Garland homes do), a 96% AFUE two-stage furnace is typically cheapest to operate through Garland's 20-30 freeze nights. If you're electric-only or want one system for both heating and cooling, a modern variable-speed heat pump works well in Garland's climate and qualifies for federal tax credits. We run both numbers so you can compare.

How much does heating replacement cost in Garland, TX?

Full system replacement runs $8,000-$20,000+ depending on tier and whether it's gas furnace, heat pump, or electric. Stay Cool (Goodman 15 SEER2) $8,000-$14,000, Stay Frosty (Carrier 18 SEER2) $12,000-$18,000, It's A Frosty Life (Trane 20+ SEER2) $16,000-$20,000+. Heat pump adds $2,000 over the base tier; 10-year labor warranty adds $3,500.

What size furnace do I need for my Garland home?

It depends on square footage, insulation, window area, and ductwork — not just a rule of thumb. We run a Manual J load calculation on every replacement, which is the ACCA standard for sizing. Central Garland 1950s-70s ranch homes in the 1,400-2,000 sqft range typically need 60,000-80,000 BTU furnaces. Oversizing is a bigger problem than undersizing — it causes short cycling, temperature swings, and humidity issues.

How long does a new furnace or heat pump last in Garland?

Gas furnaces: 15-20 years with annual maintenance. Heat pumps: 12-15 years because they run year-round for both heating and cooling. Variable-speed equipment tends to last longer than single-stage because it doesn't cycle on/off as hard. Frosty Club Premium ($300/yr) includes 2 tune-ups which extend equipment life significantly.

Do you offer financing for heating replacement in Garland?

Yes — Optimus, Synchrony, and GreenSky with $0 down on approved credit. 50% deposit at booking, balance on completion. Application takes 5 minutes and most Garland homeowners get approved same-day. Monthly payments work out to roughly 1/60th of the system price.

Ready for a New Heating System in Garland?

Free in-home estimate. Flat-rate pricing. $0 down financing on approved credit. Installation typically within 1-2 weeks.

Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E. Frosty Club Basic $99/yr · Premium $300/yr.

OJ

Written by

Omar Jacobo

EPA 608 Certified Technician (#2396328) | Co-Owner, Frosty's HVAC LLC

Omar has been serving local homeowners since 2018. Learn more

// Ready When You Are

Ready For Reliable HVAC Service?

Request service online, call for same-day help, or see your replacement price.

Call NowBookText Us