Heating Repair in Duncanville, TX
Fast, honest, flat-rate residential furnace and heat pump repair in Duncanville. Diagnostic $85 (waived with repair). Licensed TACLA126718E, EPA 608 Universal certified, family-owned since 2018.
How Much Does Heating Repair Cost in Duncanville?
Furnace repair in Duncanvillestarts at $85 for the diagnostic (waived with any repair). Most common heating repairs fall in the $250-$1,300 range. We're flat-rate, which means the price quoted before we start is the price you pay at the end. Frosty Club members save 10-15% on every repair.
| Repair | Regular Price | Frosty Club Member |
|---|---|---|
| Diagnostic / service call(Waived with repair) | $85 | $72.25 |
| Furnace ignitor replacement | $400 | $340 |
| Flame sensor replacement | $400 | $340 |
| Pressure switch replacement | $250 – $550 | $212.50 – $467.50 |
| Pilot assembly replacement | $350 – $550 | $297.50 – $467.50 |
| Gas valve replacement | $400 – $1,200 | $340 – $1,020 |
| Inducer motor replacement | $500 – $1,300 | $425 – $1,105 |
| Blower motor (standard) | $750 – $1,500 | $637.50 – $1,275 |
| Blower motor (ECM) | up to $2,800 | up to $2,380 |
| Control board (universal) | $500 | $425 |
| Control board (ECM / modulating) | up to $3,500 | up to $2,975 |
| Thermostat (basic) | $350 | $297.50 |
| Thermostat (programmable) | $500 | $425 |
| Cracked heat exchanger(CO safety — never repaired) | FULL FURNACE REPLACEMENT | FULL FURNACE REPLACEMENT |
Cracked Heat Exchanger: Safety First
A cracked heat exchanger means combustion gases — including carbon monoxide — can leak into your home's air supply. We NEVER repair a cracked heat exchanger. The only safe fix is a full furnace replacement. If I find a crack during diagnostic, I red-tag the unit on the spot and show you our three replacement tiers. Learn more about CO safety at the EPA.
Save More with Frosty Club
Basic ($99/yr):10% off all services | Premium ($300/yr): 15% off + $500 repair credit + 2 free tune-ups (fall heating + spring AC)
Join Frosty ClubWhat Are the Most Common Heating Problems in Duncanville?
Texas winters are mild, but furnaces still need regular service — and when they fail on a 28°F January morning, they tend to fail all at once. Here's what I see most often on Duncanvilleheating calls, and what each one typically costs to fix.
Furnace won't ignite
Failed hot-surface ignitor ($400) or coated flame sensor ($400). Both are same-day fixes. The $85 diagnostic identifies the exact cause.
Blowing cold air instead of hot
Usually a failed ignitor, bad flame sensor, or a stuck gas valve. We run a combustion analysis to confirm the exact cause before quoting.
Loud buzzing or grinding
Dying inducer motor ($500-$1,300) — the draft fan pulling combustion gases through the heat exchanger. Replace before it takes out the control board.
Short cycling (on/off/on/off)
Dirty flame sensor, failing limit switch, or restricted airflow. Can be an early warning of a heat exchanger issue — we diagnose carefully.
Gas smell or CO alarm
EMERGENCY — leave the house, call Atmos Energy at 866-322-8667, then call us. We locate the leak source and repair or red-tag as required.
Cracked heat exchanger
Carbon monoxide risk — NEVER repaired. Full furnace replacement required for safety. We confirm with combustion analyzer and bore-scope inspection.
Why DuncanvilleHomeowners Trust Frosty's for Heating Repair
Duncanville heating repair work is almost entirely gas furnace service — the city's 1960s-80s housing stock came online when gas was cheap and heat pumps were rare. Duncanville Estates, Alexander, and Armstrong ranch homes run 60,000-100,000 BTU gas furnaces in the attic or closet, many of them second-generation installs from the 1990s-2000s that are now 20-30 years old. The dominant failures when temperatures drop into the 20s are hot-surface ignitors ($400), dirty flame sensors ($400), and stuck gas valves ($400-$1,200). Red Bird 1960s split-levels often have the original B-vent flue that can't accommodate a modern 96% AFUE replacement without new venting work.
The heat exchanger is the component we worry about most on older Duncanville furnaces. Most Duncanville Estates and Alexander systems are now running their second furnace, but a handful of Red Bird and Armstrong homes still have original 30-40 year-old furnaces that should be retired for safety. A cracked heat exchanger leaks combustion gas — including carbon monoxide — directly into your supply air, and we don't repair it. We condemn the furnace and quote a replacement. Every Duncanville heating diagnostic includes a CO check at the supply register and visual inspection of the heat exchanger.
Inducer motor failures ($500-$1,300) are climbing in Duncanville as the 1990s-2000s furnace replacement generation starts aging out. When the inducer motor bearings go, the furnace hums on startup but won't complete the ignition sequence — you get lockout codes and no heat. We diagnose with a static pressure reading on the vent, a current draw check, and a visual bearing inspection. Call (469) 254-0548 and we'll figure out exactly what's wrong for $85 (waived with repair).
Neighborhoods we serve in Duncanville: Duncanville Estates, Red Bird, Alexander, Armstrong, Main Street corridor, Wheatland Road, Cedar Ridge, Camp Wisdom Road
Why Our Credentials Matter for Heating Repair
TACLA126718E
Texas HVAC Contractor License held by Mariafernanda Jacobo. Issued and regulated by the Texas Department of Licensing and Regulation.
EPA 608 Universal
Omar Jacobo, #2396328. Required by the U.S. EPA for any refrigerant work on heat pumps (R-22, R-410A, R-454B, R-32). Also ensures safe combustion analysis standards.
Energy Star Partner
Replacement heating systems meet or exceed U.S. Department of Energy minimums. 90%+ AFUE furnaces and ENERGY STAR heat pumps qualify for some utility rebates.
Learn more about our credentials on our About page or visit omar-jacobo.com.
Heating Repair FAQ for Duncanville, TX
How much does furnace repair cost in Duncanville, TX?
Diagnostic $85 flat (waived with repair). Common Duncanville furnace repairs: hot-surface ignitor $400 ($340 for members), flame sensor clean $400 ($340), gas valve $400-$1,200 ($340-$1,020), inducer motor $500-$1,300 ($425-$1,105), pressure switch $250-$550. We're flat-rate — you see the total before we start.
Is my furnace safe to run if the heat exchanger is cracked?
No. A cracked heat exchanger leaks combustion gas — including carbon monoxide — directly into your supply air. We don't repair cracked heat exchangers because they can't be safely welded to spec. Instead we condemn the furnace and quote a full replacement. Every Duncanville heating diagnostic includes a heat exchanger inspection and CO check at the supply register, especially on older Red Bird and Armstrong systems.
Why does my Duncanville furnace lockout after a few seconds?
Lockout after a few seconds of running is almost always a dirty flame sensor — the most common Duncanville furnace repair. The flame sensor is a metal rod that detects flame presence via micro-amp current; summer dust buildup insulates it and the control board thinks there's no flame, so it shuts off the gas. Flame sensor cleaning is $400 flat ($340 for members) and solves 60% of these calls.
Do you repair old furnaces in Duncanville?
Yes — within limits. If parts are available and the heat exchanger is safe, we repair. For 30+ year-old Red Bird or Armstrong furnaces where parts are obsolete or the heat exchanger shows stress cracks, we quote replacement. Every diagnostic includes a safety check, and I'll tell you straight if repair makes sense or if the system needs to retire.
My Duncanville furnace smells like burning dust — normal?
First time in the fall when you kick the heat on — yes, that's dust burning off the heat exchanger and it clears in a few minutes. Normal. If the smell persists, smells electrical, or smells like gas, shut the system off at the thermostat and call us at (469) 254-0548. Electrical smells mean an overheating motor; gas smell means leave the house and call Atmos first.
How fast can you get to Duncanville for a no-heat call?
We're about 35 minutes from Duncanville down I-35E, so same-day response is routine across 75116. During freeze events we prioritize no-heat calls in homes with kids, pets, or elderly residents. Frosty Club members get priority scheduling and no overtime charges. Call (469) 254-0548.
Related Services & Resources
Need Heating Repair in Duncanville Right Now?
Call us or request service online. Same-day appointments available for Duncanville homeowners during winter cold snaps. Flat-rate pricing — no surprises, no hourly charges, no upsell scripts.
Written by Omar Jacobo, EPA 608 Universal Certified Lead Technician at Frosty's HVAC LLC. Licensed TACLA126718E.
Written by
Omar Jacobo
EPA 608 Certified Technician (#2396328) | Co-Owner, Frosty's HVAC LLC
Omar has been serving local homeowners since 2018. Learn more
Ready For Reliable HVAC Service?
Request service online, call for same-day help, or see your replacement price.
Call Now